How to troubleshoot an IPC CT 71 that does not work?
If your IPC Dryer machine isn't working, here's what to check: * Ensure the batteries are properly connected. * If the batteries are flat, recharge them. * Replace any blown fuses. * Make sure the electronic key is inserted. * For model C, verify the power cable is plugged into the mains socket.
Why is the suction motor not starting on my IPC Dryer?
If the suction motor on your IPC Dryer isn't starting, it could be due to several reasons: * The dirty water tank might be full; empty it. * A fuse may have blown; replace it. * For BT models, the squeegee lever might be raised; lower it. * The batteries could be flat; recharge them. * The motor itself might be damaged; replace it if necessary.
What to do if the brushes do not turn on my IPC CT 71 Dryer?
If the brushes on your IPC Dryer aren't turning, it might be because: * The dirty water tank is full, so empty it. * A fuse has blown, so replace it. * A relay is damaged, so replace it. * The batteries are flat, so recharge them. * The motor is damaged, so replace it.
Why does the squeegee not clean or has poor suction on my IPC CT 71?
If the squeegee on your IPC Dryer isn't cleaning properly or has poor suction, consider the following: * The rubber blades may be worn and need replacement. * There might be a blockage or damage in the squeegee itself; check it. * The dirty water tank float could be activated, blocked by dirt, or faulty; empty the tank and inspect the float. * There could be a blockage in the suction hose; check it. * The suction hose might not be connected to the squeegee or is damaged; check the connection and hose condition.
What to do if no solution comes out of the detergent tank of my IPC CT 71?
If no solution is coming out of the detergent tank of your IPC Dryer, the following could be the reasons: * The solenoid valve might be damaged and needs replacement. * The solenoid valve could be dirty and needs checking. * The detergent tank could be empty, so top it up. * The hose delivering detergent to the brush might be blocked, so unblock it. * A fuse might have blown, so replace it.
Why is my IPC CT 71 not moving?
If your IPC Dryer isn't moving, it could be due to: * Flat batteries; recharge them. * A damaged motor (BT models); replace it.
How to fix detergent flow that does not stop in IPC CT 71?
If detergent flow doesn't stop in your IPC Dryer, it could be due to: * A damaged solenoid valve; replace it. * Damaged solenoid valve wiring; check it.
Why does my IPC CT 71 machine not clean uniformly?
If your IPC Dryer machine does not clean uniformly, it could be that the brush or abrasive disks are worn and need to be replaced.
Why do the batteries not provide the normal working time in my IPC CT 71?
If the batteries on your IPC Dryer aren't providing the normal working time, try these steps: * Clean and grease the battery poles and charging terminals, then charge the batteries if they are dirty or oxidized. * Check the battery charger to ensure it is working and suitable.
Lists potential hazards associated with different parts of the machine.
Details essential safety rules and precautions for operating the machine.
Step-by-step guide to safely unpack the machine.
Instructions for preparing batteries before installation.
Procedures for installing and connecting batteries to the machine.
Steps to prepare the machine before starting operation.
Overview and explanation of the machine's control panel and functions.
Explanation of the electronic key's function for machine operation.
Details on using the operation selector for different modes.
How to use the drive lever for forward and reverse movement.
Function of the 'SET' button for menu navigation.
Function of the '+' button for increasing values.
Function of the '-' button for decreasing values.
Guidelines for maintaining and charging the machine's batteries.
To Next Page
General