Specifications
Size W - 220mm x H - 168mm x D - 80mm
Ambient 0 to 50ºC maximum.
Supply 230V +/-15%
Thermocouple Type R, S, K, or N. (See ‘Configuration’ for change information)
Outputs Single pole 3 Amp contacts. All outputs give 230V output via internal link.
(See ‘Electrical Connections’ if isolated switching is required)
Display R or S -20ºC to +1600ºC, K or N 0 to 1300ºC
Accuracy +/-3ºC over stated operational ambient.
Delay & Soak times 0 to 99 Hours 59 Minutes in one minute increments.
Ramp Rates 1 to 1000 ºC per Hour., “PASS”, or “FULL”
Setpoints 0 to maximum of display (This depends upon thermocouple type selected.)
(will be limited by Setpoint limit - See below.)
Setpoint Limit Adjustable over full display range.
Programs 10 (Except for single program version)
Pre loaded for convenience but all user modifiable.
Linking On models MP/L,MP/E & MP/Z.
Supplied By;-
Designed and manufactured by ;-
The Industrial Pyrometer Co Ltd
66/76 Gooch Street North, Birmingham, B5 6QY, England.
Tel: +44 (0) 121 622 3511 Fax: +44 (0) 121 666 6386
To Previous Page
Loading...