iPECS 9010 - Phone Features; Do Not Disturb (DND); Ad Hoc Conference Calls; Programming Call Forward

Using Your Phone
Features
Do Not Disturb (DND)
Ad Hoc Conference Calls
*3 way calling*
*To congure this on the 9010 a ex needs to be assigned
as a conference key. To programmge this press TRANS,
press a ex key, dial 91, HOLD to save*
Programming Call Forward
(Routes your calls to another extension/group/speed
dial)
*All these features will override your voicemail funcons*
Eding Ring Tones
Changing Ring Tones
Altering Ring Tone Volume
Altering The Volume Of The Call You’re Listening
To
Press ‘DND’ to acvate.
Press ‘DND’ to deacvate.
*Please note that this is not available on the main admin
handset*
To call the rst party, follow “Making an External/
Internal Call” above for instrucons.
Once connected press Conf ‘So Key’ once.
Call the second party (As Above)
Once connected, press Conf ‘So Key’ twice to
connect the calls.
Dial 554 or press the navigaonal key right, then
press the so key saying forwared then select one of
the following opons:
1 - Immediate Call Forward (Forwards all calls
instantly)
2 - Busy call forward (Only forward calls when you
are on the phone)
3 - No answer call forward (Only forwards calls if you
don’t answer
4 - Busy/No Answer Call Forward (Mix of 2 & 3)
Dial the extension number
To disable all call forwarding, dial 554#
Press ‘TRANS’ dial 11 (Internal ring tone)
Press ‘TRANS’ dial 12 (External ring tone)
Select desired ring ton by dialling keys 01-16
Press ‘HOLD’ to store
Press + or - on the volume keys whilst the handset is
down and ringing
Press + or - on the volume keys whilst on the call
for assistance please call
01603 964288
www.link-solutions.co.uk