iPECS LIP-9020 - Attendant menu

LIP-9000 Series User Guide - ST 19
 Current feature is shown in the LCD.
 New feature can be entered.
 When BUTTON LABEL is chosen, press the desired button.
 Current label is shown in the LCD.
 New label can be entered.
 Press the OK button.
2.2.6 Attendant menu
The Attendant menu is only available on the System Attendant phone.
To access the Attendant menu:
 From the Attendant Station phone, press the MENU button,
 Press 0 (Attendant); the following will display:
1. DATE/TIME SET
2. SET ICM ONLY MODE
3. RESTORE COS
4. MONITOR CONF ROOM
5. DELETE CONF ROOM
SELECT (1 - 5)
BACK OK
 Date/Time Set—Enter mm/dd/yy, and press OK Navi button or press
the HOLD(SAVE) button; enter hh/mm, and press OK Navi button or
press the HOLD(SAVE) button.
 Set ICM Only Mode—Dial the Station Range for ICM only calls (ex.,
103-108=103108), press OK Navi button or press the HOLD(SAVE)
button.
 Restore COS—Dial the Station Range for COS restoring (ex., 103-
108=103108), and press OK Navi button or press the HOLD(SAVE)
button.
 Monitor Conference Room—Enter the Conference Room number to
view the number of attendees in the Conference Room.
 Delete Conference Room—Enter the Conference Room number and
press OK
Navi button or press the HOLD(SAVE) button to delete.