iPega Batman - Operation Instructions; Android System Operations; Console and Windows Operations; Electrical Parameters

Operation instructions:
Android system
Android general mode
(HID Gamepad Mode)
Working mode
Mouse Mode
Bluetooth pairing buttons
(Press and hold on 2's)
In HID mode, press the
button to shift
Android 1button
Indicator LED1
LED2
Press button to swift to
mouse
mode from
Android
general
mode
Remark
Playstation 3
Windows system
Connet by USB
data Cable mode
2.4G wireless mode
Working mode
2.4G wireless mode
Press the START key to power
on the PS3 mode/press for
3
seconds
to
enter
the
Xinput
mode
+SELECT
Bluetooth pairing buttons
(Press and hold on 2's)
+SELECT button
PS3 mode: LED2
LED2
Indicator
LED1
X-input mode: LED3
Need to use 2.4
Need to use 2.4
Need USB cable
Remark
wireless Dongle
wireless Dongle
Electrical Parameters;
5.Charging voltage/current: DC5V/500mA
1.Working voltage: DC3.7V
2.Working
current:
30
mA
6.Bluetooth transmission distance: s8M
3.Consecutive Usage Hours: 10H
7.Battery capacity: 380mAh
4.Sleep mode
current::
<10uA
8.Standby time: up to 30days once fully charged
Notes:
1. Please do not store this product in wet or high-temperature areas
2. Don't knap, beat, drub, pierce, or try to decompose this product, to avoid unnecessary damage
to the product.
3. The product has built-in batteries, and please dont discard them together with the ages
4.
Don't
charge
the
controller
in
a
place
near
the
fire
or
other
heat
source.
5. Non professional personnel should not disassemble the product, otherwise it will nat ho
covered
in
the
after-sales
warranty
service.
e