Select Camera 1
Select the camera for the first splitscreen pane.
Select Camera 2
Select the camera for the second splitscreen pane. It can be the same or
different than Camera 1.
Adjust Camera
Within the Select Video Device pop-up, hit Adjust Camera to tweak the image
coming from the selected camera.
Horizontal/Vertical
Splitscreen can be presented either horizontally or vertically depending on
your selection.
Each splitscreen pane can be further adjusted by hitting the "<" icon in the upper
right to bring up more options. Hit ">" again to collapse the options
Notes on Splitscreen Mode:
High computer performance is required when two doc cams are
connected at high resolutions. If the image freezes or lags in this setup,
consider lowering the resolution.
If the second window shows no live image, try a different USB port.
Your two doc cams must be plugged into different USB ports and
cannot be plugged into the same USB hub.
Zoom
Digitally zoom the image.
Rotate
Rotate the image.
Resolution
Change the resolution of the image.
Exposure
Brighten or darken the image.
Manual Focus
Drag the focus slider to the desired focus, which will lock into place. To
return to Autofocus, uncheck the "AF-Lock" box.
A
B
C
D
To Next Page
Loading...