Need help?Do you have a question about the IPG YLS-4000-KC and is the answer not in the manual?
General| Average Power | 4000 W |
|---|---|
| Wavelength | 1070 nm |
| Beam Quality (M²) | < 1.1 |
| Cooling | Water-cooled |
| Mode of Operation | CW |
| Pulse Duration | N/A (CW operation) |
| Pulse Repetition Rate | N/A (CW operation) |
| Power Supply | 380-480 VAC, 3-phase, 50/60 Hz |
Provides essential safety rules for operating the product safely.
Lists the mandatory personal protective equipment (PPE) required.
Identifies potential hazards associated with product operation.
Describes the built-in safety features that protect the user.
Describes the controls and indicators on the laser's front panel.
Details the necessary electrical and water connections.
Details the procedures for connecting the product's various interfaces.
Describes how to connect communication and control interfaces.
Guides the user on properly connecting the fiber optic cable.
Explains how to connect the cooling water lines to the product.
Lists critical steps and safety checks required before startup.
Outlines the process for formally handing over the product for use.
Provides step-by-step instructions for powering the laser on and off.
Explains how to switch the laser power supply on and off.
Guides users through performing operations in TEST mode.
Describes manual laser operation and power setting.
Guides on selecting, starting, and managing laser programs.
Explains how to control laser emission via external signals.
Describes controlling laser power using an analog interface.
Provides a step-by-step guide for installing LaserNet.
Explains how to set up network communication between PC and laser.
Guides on launching the software and establishing a connection.
Describes the main components and layout of the LaserNet software.
Directs users to Appendix A for detailed troubleshooting information.
To Next Page
