SECTION III
Operation
Page 3.14
BP+2.9X
11/95
3.6 UPS Operating Procedures (continued)
3.6.1System Startup Procedure (continued)
8. This screen will show for a short time.
9. Then this screen will appear, indicat-
ing that the UPS is now in normal operation.
3.6.2 Alarm Identity/History
As described in Paragraph 3.4.2.1 this is
the first Alarm History screen. It can be dis-
played by pressing the
or
button, going
through the sequence of screens described in
Paragraph 3.4.2 until this screen appears.
xx = month yy = day of the month zz = year
uu = hour (on the 24-hour clock) vv = minutes of the hour
ww = second aa = cycles b = 114 cycles
tttt = alarm sequence number. 0 is most recent. Press
- to scroll from a
higher number to
or press to scroll from 0 to a higher number.
* The identity of the alarm is abbreviated on the screen. The full
identification of each and corrective action are given in Table 3-2.
Wait
Retransfer
Pending
UPS
Operating
Normally
xx/yy/zz tttt
uu:vv:ww.aab
Alarm identity
To Next Page
Loading...