Need help?Do you have a question about the iPollo V1 mini Classic Series and is the answer not in the manual?
General| Manufacturer | iPollo |
|---|---|
| Model | V1 mini Classic Series |
| Operating Temperature | 0 - 40 °C |
| Network Connection | Ethernet |
| Algorithm | Ethash |
Inspect package for damage, check server case, fan, cables, and listen for abnormal sounds.
Provides official website, WeChat, Facebook, Twitter, and email for customer support.
Recommends ambient temperature and notes hashrate dependency on the Mining Pool.
Identifies the WiFi signal receiver, power cable, server unit, and power adapter.
Explains indicators (Fault, Normal), buttons (Reset, IP Report), ports (TF, Power, ETH), and ANT.
Covers server placement, socket accessibility, power connection, input voltage, and safety precautions.
Connects the dedicated power supply with two 6PIN DC outputs and 100-240VAC input.
Guides on wired (ETH) or WiFi internet connection for the server.
Instructions to find the server IP using the 'show IP' software.
Details accessing the web management system via IP and logging in.
Steps to configure mining pool details, including URL and Worker, using Antpool as an example.
Configures wired connection, choosing between DHCP or Static IP protocols.
Details entering IP, netmask, gateway, and DNS server for static IP configuration.
Guides on connecting to the server's WiFi signal and accessing its login interface.
Modifies the WiFi network's SSID and password for optimal connection.
Covers server restart, laptop WiFi connection, and finding the new IP address.
To Next Page