21
ENGINE OIL CHANGE
Drain the used oil while the engine is warm. Warm oil drains quickly and
completely.
1. Place a suitable container below the engine to catch the used oil, and then
remove the oil filler cap/dipstick, drain plug and sealing washer.
2. Allow the used oil to drain completely, and then reinstall the drain plug, and
tighten it securely.
Please dispose of used motor oil in a manner that i
s compatible with the
environment. We suggest you take used oil in a sealed container to your local
recycling center or service station for reclamation. Do not throw it in the trash;
pour it on the ground, or down a drain.
3. With the engine in a level position, fill to the outer edge of the oil filler hole with
the recommended oil.
Engine oil capacities
WP25: 0.35L
WP50.WP80.WT80.HP50.CP50.WP100A:0.6L
WP100B,WP100C:1.1L
Running the engine with a low oil level
can cause engine
damage.
4. Screw in the oil filler cap/dipstick securely.
ENGINE OIL RECOMMENDATIONS
Oil is a major factor affecting performance and service life. Use 4-stroke
automotive detergent oil.
SAE 10W-30 is recommended for general use. Other viscosities shown in the
chart may be used when the average temperature in your area is within the
recommended range.
OIL FILLER
CAP/DIPSTICK
DRAIN PLUG & SEALING WASHER
OIL LEVEL
To Next Page
Loading...