iPower AWP80 - Starting the Engine

15
6. STARTING THE ENGINE
1. Prime the pump (see page 14).
2. Move the fuel valve lever to the ON position.
3. To start a cold engine, move the choke lever to the CLOSED position. To
restart a warm engine, leave the choke lever in the OPEN position.
4. Move the throttle lever away from the SLOW position about 1/3 of the way
toward the FAST position.
5. Turn the ignition switch to the ON position.
FUEL VALVE LEVER
ON
CHOKE LEVER
CLOSED
SLOW
THROTTLE LEVER
IGNITION SWITCH
ON