3. CONTROLS
Read and understand this manual. Know what the controls do and how to
operate them.
Familiarize yourself with the pump and its operation before you begin pumping.
Know what to do in case of emergencies.
Fuel Valve Lever
The fuel valve opens and closes the passage between the fuel tank and the
carburetor.
The fuel valve lever must be in the ON position for the engine to run.
When the engine is not in use, leave the fuel valve lever in the OFF position to
prevent carburetor flooding and to reduce the possibility of fuel leakage.
Ignition Switch
The ignition switch controls the ignition system.
The ignition switch must be in the ON position for the engine to run.
Turning the ignition switch to the OFF position stops the engine.
OFF
ON
IGNITION SWITCH
FUEL VALVE LEVER
ON
To Next Page
Loading...