The rubber castor cups also prevent the bed from sliding when located on smooth or hard surface
flooring.
CORD MAINTENANCE:
Always unplug the base from the electrical outlet before cleaning or servicing the base. If the
cord or plug is damaged, discontinue use of the bed base and contact a qualified electrician for
examination and repair. Make sure the base is in a flat position, and the vibrating motors are off
before unplugging from the power source.
EMERGENCY BATTERY BACKUP:
This foundation is equipped with a battery backup that will assist in returning the base to a flat
position during a power outage. To use this feature, simply install two 9volt batteries into the
battery backing transformer. Use the reset button on the control box (black box attached to
bottom of bed) to return the base to a flat position. Please do not use batteries for normal
operation of the base.
SETUP and INSTALLATION
Important: We strongly recommend
two people setup and assemble this product.
Step 1:
Check to verify all parts are included before discarding any packing materials.
All electronics and components that need to be installed are located in boxes under the base or
attached to the frame.
A) Wireless Remote Control (1)
B) Input Power Cord (1)
C) Transformer Power Supply (1)
D) 2"+2"+8" Plastic Legs (6)
*King size beds come with seven pcs plastic legs.
E) Mattress Retainer Bar (1)
*King size beds come with two mattress retainer bars.
F) Manual (1)
To Next Page
Loading...