-35-
4.5 Pan/Tilt Settings
The Pan/Tilt menu allows you to configure the pan/tilt functions of the
camera.
Pan & Tilt >> Pan & Tilt Settings
- Pan/Tilt Calibration: Click Calibration to calibrate the
position of the camera lens.
- Pan Steps: Set the changing range (1~20 degrees) when you
click the Left/Right button.
- Tilt Steps: Set the changing range (1~20 degrees) when you
click the Up/Down button.
- Auto Patrol Stay Time: Set the stay time (1~999 seconds) of
each preset positions when the camera is patrolling.
- Startup Preset: Set the position (1~8, or None) to start
patrolling.
To Next Page
Loading...