-4-
1.2 Getting to Know Your Camera
Front View
* The camera’s USB port supports WCN (Windows Connect Now)
technology, which allows you to use the notebook computer to set
up and store your wireless networking configuration on the USB
storage device, and then retrieve the wireless settings when you
connect the USB storage device to the camera.
NOTE After long pressing the Unmount button for four seconds, the
Power LED starts flashing. When the Power LED resumes the
steady amber light, you can remove the USB device safely.
Lens Assembly
Power LED
indicates the camera
is powered on with
the steady amber
light.
Light Sensor
is used to trigger on and off the
Infrared LEDs according the
environmental light level.
USB Port*
allows you to connect an
external USB device. It
provides the power
distribution up to 500mA.
Infrared LEDs (x7)
allow your camera to
capture clear image in
a dark environment.
Internal Microphone
allows the camera to
receive sound and voice.
Link LED
indicates the camera’s
network connectivity
with the flashing green
light.
Antenna
To Next Page
Loading...
Need help?
General
