IPUX ICS1330 User Manual

-50-
Event Configuration >> GPIO Trigger
Select the Enable option to enable the GPIO trigger function of the
camera, so that you can set Trigger Out function or send captured
images within the detecting area to the FTP server, email receiver,
Network Storage server, or the connected USB device. You have to
configure corresponding settings, such as FTP server and email
server, to enable this feature.
- Schedule Profile: Select a schedule profile from the pull-down
list.
- Action: Set the Trigger Out function or select the destination
of the captured images: Save Image to USB, Record to
Network, Storage, Send Email, or FTP Upload.

IPUX ICS1330 Specifications

General

Brand	IPUX
Model	ICS1330
Category	IP Camera
Language	English