Need help?Do you have a question about the iQe SIMPLICITY 30 and is the answer not in the manual?
Highlights essential instructions for the user and important notices regarding boiler warranty.
Identifies the 'benchmark' mark signifying quality in domestic heating system installation and servicing.
Details the first-year guarantee and the three conditions required for securing extended warranty coverage.
Outlines responsibilities for manufacturers and installers under the Benchmark scheme to ensure customer needs are met.
Specifies the required standards for installers regarding competence, compliance with regulations, and product usage.
Defines the expected customer service from installers, including explanations and post-work support.
Explains the scheme's aim to improve heating system standards and its management by the Heating and Hotwater Industry Council.
Details installer obligations for completing the Benchmark Checklist and customer receipt of compliance certificates.
Covers gas safety regulations and introduces the IQE SIMPLICITY boiler models.
Explains how the boiler functions in central heating mode (winter) and hot water only mode (summer).
Provides instructions for the initial ignition and selecting operational modes via the user interface.
Guide on how to set and adjust the central heating water temperature using the controls.
Details on regulating temperature based on external sensors and setting domestic hot water temperature.
Instructions for safely switching off the boiler for short or extended periods to prevent frost damage.
Lists common error codes (ALL 01-29) with descriptions and recommended troubleshooting steps.
Specifies the minimum required distances around the appliance for safe and effective maintenance access.
Details ventilation requirements for installation and general safety precautions.
Provides essential safety instructions, including critical actions to take in case of a suspected gas leak.
Instructions for setting the time of day and programming switching times on the mechanical timer.
Guide to setting the clock, programming daily ON/OFF times, and selecting specific days.
Instructions for removing programmed settings and utilizing the SKIP feature for temporary deactivation.
To Next Page
General
