Iridex IQ 577 - Page 40

36 IRIDEX IQ 577
®
/IQ 532
®
Laser Systems Operator Manual 15510-EN Rev G
Laser Warning
Rear panel of console
(IQ 577)
Responsibility for Validation and Fitness-of-Use: Because Valmark Industries, Inc. has no controlover the use or application of
these parts, it is the sole responsibility of the OEM customer and/or its designated
manufacturer to test all custom parts for fitness-of-use and validation of design
prior to acceptance of production units. Valmark Industries provides expertise in
the layout and consistent fabrication of high quality, reliable membrane switch, custom graphics and labeling products. Valmark and its employees do NOT
purport to be experts in the end-use application of our customers, or the
environments in which these products will be stored and/or used.
THIS PRINT MUST BE APPROVED AND RETURNED WITHIN 24
HOURS IN ORDER FOR THIS JOB TO PROCEED WITH PRODUC-
TION. ACCEPTANCE OF THE BELOW ART SAMPLE RELEASES
VALMARK OF ANY GRAPHICS LIABILITY AFTER THE PRODUCTION RUN. (1) Valmark may, at its discretion unless otherwise noted, substitute any materials or BOM components with equivalent or similar materials and/or components based on control of cost or
availability
RESUBMIT WITH
CORRECTIONS
APPROVED WITH
CORRECTIONS
OK AS IS
APPROVAL
SIGNATURE
DATE
APPROVAL PRINT
F
PN 65888 Rev F
2.450"
4.180"
5.680"
0.222"
0.560"
4.630"
0.730"
1.220"
5.410"
6.630"
0.526"
11.040"
R 0.637"
2X
R 0.125"
ALL CORNERS EXCEPT
WHERE NOTED
0.139"
Conforms to AAMI STD ES60601-1 & IEC STDS 60601-2-22, 60601-1-6, 62304 & 60825-1
Certified to CSA STD C22.2 Nos. 60601-1 & 60601-2-22
ETL CLASSIFIED
.010 8B35
3M468 MP
1
DIE LINE
2
GRAPHICS: WHITE
3
BLACK TEXT WITH PMS YELLOW C FIELD
BACKGROUND: BLACK
5
PMS 285C BLUE LOGO
4
NOTES: CONSTRUCTION:
BASE MATERIAL
ADHESIVE
GRAPHIC OVERLAY
01/19/17
65888
IRIDEX
REV:
CUSTOMER:
DATE:
DATE:
1 OF 1
1:1
TOLERANCE:
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION
SHEET:
SCALE:
TITLE:
APP BY:
DR BY:
Fax (925) 960-0900
Phone (925) 960-9900
www.nidec-vis.com
7900 National Dr. Livermore, CA 94550
PART #:
.XX ±0.01”
.XXX ±0.010”
TOOLING:
ANGLES
±0.5º
.XX ±0.02”
.XXX ±0.015”
CUT TO GRAPHICS:
ANGLES
±0.5º
Patent: http://iridex.com/patents.aspx
FCC ID: UDB65600
Emergo Europe
Prinsessegracht 20
2514 AP The Hague
The Netherlands
LASER RADIATION
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION
CLASS 4 LASER PRODUCT
CLASS 2 LASER PRODUCT
(IEC 60825-1:2007/2014)
RAYONNEMENT LASER
EXPOSITION DANGEREUSE DE
L’OEIL OU DE LA PEAU AU
RAYONNEMENT DIRECT OU DIFFUS
APPAREIL A LASER DE CLASSE 4
APPAREIL A LASER DE CLASSE 2
(CEI 60825-1:2007/2014)
Laser Warning
Rear panel of console
(IQ 532)
Responsibility for Validation and Fitness-of-Use: Because Valmark Industries, Inc. has no controlover the use or application of
these parts, it is the sole responsibility of the OEM customer and/or its designated
manufacturer to test all custom parts for fitness-of-use and validation of design
prior to acceptance of production units. Valmark Industries provides expertise in
the layout and consistent fabrication of high quality, reliable membrane switch, custom graphics and labeling products. Valmark and its employees do NOT
purport to be experts in the end-use application of our customers, or the
environments in which these products will be stored and/or used.
THIS PRINT MUST BE APPROVED AND RETURNED WITHIN 24
HOURS IN ORDER FOR THIS JOB TO PROCEED WITH PRODUC-
TION. ACCEPTANCE OF THE BELOW ART SAMPLE RELEASES VALMARK OF ANY GRAPHICS LIABILITY AFTER THE PRODUCTION RUN. (1) Valmark may, at its discretion unless otherwise noted, substitute any materials or BOM components with equivalent or similar materials and/or components based on control of cost or availability
RESUBMIT WITH
CORRECTIONS
APPROVED WITH
CORRECTIONS
OK AS IS
APPROVAL
SIGNATURE
DATE
APPROVAL PRINT
E
PN 65893 Rev E
0.526"
0.139"
4.180"
6.630"
5.410"
1.220"
2.450"
11.040"
0.560"
0.222"
R 0.637"
2X
R 0.125"
ALL CORNERS
EXCEPT WHERE NOTED
.010 8B35
3M468 MP
1
CUT THROUGH AREAS (8X)
2
GRAPHICS: WHITE
3
BLACK TEXT WITH PMS YELLOW C FIELD
BACKGROUND: BLACK
5
PMS 285C BLUE LOGO
4
NOTES: CONSTRUCTION:
BASE MATERIAL
ADHESIVE
GRAPHIC OVERLAY
01/19/17
65893
IRIDEX
REV:
CUSTOMER:
DATE:
DATE:
1 OF 1
1:1
TOLERANCE:
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
THIRD ANGLE PROJECTION
SHEET:
SCALE:
TITLE:
APP BY:
DR BY:
Fax (925) 960-0900
Phone (925) 960-9900
www.nidec-vis.com
7900 National Dr. Livermore, CA 94550
PART #:
.XX ±0.01”
.XXX ±0.010”
TOOLING:
ANGLES
±0.5º
.XX ±0.02”
.XXX ±0.015”
CUT TO GRAPHICS:
ANGLES
±0.5º
Conforms To AAMI STD ES60601-1, IEC STDS 60601-2-22,
60601-1-6, 60825-1, 62304
Certified To CSA STD C22.2 Nos 60601-1 & 60601-2-22
Patent: http://iridex.com/patents.aspx
FCC ID: UDB65600
ETL CLASSIFIED
Emergo Europe
Prinsessegracht 20
2514 AP The Hague
The Netherlands
LASER RADIATION
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION
CLASS 4 LASER PRODUCT
CLASS 2 LASER PRODUCT
(IEC 60825-1:2007/2014)
RAYONNEMENT LASER
EXPOSITION DANGEREUSE DE
L’OEIL OU DE LA PEAU AU
RAYONNEMENT DIRECT OU DIFFUS
APPAREIL A LASER DE CLASSE 4
APPAREIL A LASER DE CLASSE 2
(CEI 60825-1:2007/2014)