Single Mode Antenna LITE Kit (No GNSS)
(GELITKT2301)
Prior to installing or using Iridium GO! exec, read and understand this Installation Guide, and
the Iridium GO! exec User Manual including the safety warnings and information. Failure to
do so could result in serious injury or death.
* Please note this is a single mode Iridium only antenna (NOT including a Global Navigation Satellite
System (“GNSS”) Antenna) and so will not assist with providing location coordinates for SOS. To use the
Iridium GO! exec as a GNSS device requires: moving the device outdoors with a view of the sky, installing
firmware 1.0.6 or higher, and setting GNSS antenna to internal in device settings. Refer inside page 8, Note
3 for details.
To Next Page
