irinox ICY S - User Manual

36 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

N°REV REVISION DESCRIPTION DATE REV. REVISER

00

FIRST EMISSION

01/12/2015

NC

U S E A N D

M A I N T E N A N C E

I N S T R U C T I O N S

Questions and Answers

J
Jason MillerAug 15, 2025
How to troubleshoot the front board if it does not turn on in my irinox ICY S Refrigerator?
- R
  Ryan FigueroaAug 15, 2025
  If the front board of your Irinox Refrigerator doesn't turn on, first check the electrical line connection to ensure there is a power supply. If the power supply is fine, inspect the Bus cable and ensure it is correctly inserted in the dedicated connector on both the Front board and the Relay board. Finally, if the issue persists, the protection fuses might be blown, requiring replacement by an authorized technician.
B
Brianna MeyerAug 19, 2025
What to do if the compressor does not work in my irinox ICY S?
- N
  Nicole LyonsAug 19, 2025
  If the compressor in your Irinox Refrigerator isn't working, start by checking the electrical line connection to ensure it's properly powered. If the power supply is not the issue, it could be due to several other reasons: blown auxiliary circuit protection fuses (requiring replacement by an authorized technician), intervention of internal Klixson for overload, a tripped circuit breaker switch, a pressure switch intervention for high pressure (ALP alarm), a missing relay board consent, or a broken remote switch. For these issues, intervention of a technician is required.
H
hnunezAug 22, 2025
Why the cell fans do not turn in my Irinox Refrigerator?
- A
  Angela BlakeAug 22, 2025
  If the cell fans in your Irinox Refrigerator aren't turning, first check the electrical line connection to ensure there is a power supply. If the power supply is fine, it might be due to a broken fan or a broken relay board, both requiring intervention of a technician for replacement.
E
Evelyn JohnsonAug 26, 2025
What to do if the compressor works but it does not cool the cell in my irinox ICY S Refrigerator?
- L
  Leslie MoonAug 26, 2025
  If the compressor in your Irinox Refrigerator is running but not cooling the cell, it could be due to several reasons. There might be no refrigerant gas or a broken electrovalve, both requiring intervention of a technician. Alternatively, the condenser might be dirty ('Pulire batteria condensante'). Another possible cause is a broken liquid line electrovalve, which would require a technician to replace the electrovalve or coil.
J
Joshua RogersAug 29, 2025
Why is the condensing fan not working on my Irinox Refrigerator?
- Z
  zgarciaAug 29, 2025
  If the condensing fan in your Irinox Refrigerator isn't working, first ensure it has a power supply by checking the electrical line connection. If the power supply is not the issue, it could be due to a broken pressure switch, a broken fan, a broken start condenser, or missing compressor remote switch consent. For all these causes, intervention of a technician is required to replace the device, fan, start condenser, or compressor remote switch.
T
Tina SantanaAug 31, 2025
How to fix the evaporator if it does not defrost in my Irinox Refrigerator?
- M
  Mr. Elijah Jennings Jr.Sep 1, 2025
  If the evaporator in your Irinox Refrigerator isn't defrosting, the defrost cycle programming might be incorrect. Control defrost cycle programming.
H
Heather PowellSep 4, 2025
What to do if there is a door open alarm with door closed in my irinox ICY S Refrigerator?
- E
  Emily GonzalezSep 4, 2025
  If you're experiencing a door open alarm on your Irinox Refrigerator even when the door is closed, it's likely due to a faulty magnetic contact. Technician intervention is required.
K
Kelsey ZimmermanSep 8, 2025
What to do if S2 cell probe is faulty in my irinox ICY S?
- X
  xrileySep 8, 2025
  To address a faulty S2 cell probe in your Irinox Refrigerator, replace the S2 probe.
J
Jasmine SmithSep 12, 2025
What to do if there is a total block with probes S1 and S2 faulty in my irinox ICY S?
- M
  Matthew PittmanSep 12, 2025
  If you are experiencing a total block with probes S1 and S2 faulty in your Irinox Refrigerator because probes S1 and S2 are broken, replace probes S1 and S2.

Summary

General Documentation

Product Information and Handling

Covers general recommendations, preamble, transport, handling, unpacking, and basic safety.

Usage Guidelines and Training

Details loading/unloading precautions, probe use, and personnel training requirements.

Installation

Technical Data and Positioning

Includes plate data, dimensions, and placement requirements for the appliance.

Environmental and Electrical Requirements

Specifies room conditions, air exchange, power needs, and connection standards.

Connections, Drains and Safety Systems

Details refrigeration connections, condensation drain, and safety system information.

Disposal and Refrigerant Safety

Covers machine disposal guidelines and R404a gas safety precautions.

Operation

Blast Chiller Cycles and Usage

Explains how to use the blast chiller and describes the available cycles.

Control Panel and Operation Modes

Details the touch screen control panel, manual/automatic cycles, and defrosting.

Operational Advice and Parameter Settings

Provides tips for loading, temperature, preservation, and programming parameters.

Sanigen Sanitization System

Explains the Sanigen system for air and surface sanitization within the chamber.

Maintenance and Troubleshooting

Routine Cleaning and Maintenance

Covers daily cell cleaning, weekly cleaning, and evaporator washing procedures.

Condenser Care and Condensation Handling

Details cleaning the condenser unit and managing condensation drainage.

Troubleshooting Alarms and Issues

Lists alarms, visual diagnostics, and common malfunctions with possible solutions.

Accessing Components for Servicing

Guides on how to access front circuit board, electric control board, and condensing plant.

Summary

General Documentation

Product Information and Handling

Covers general recommendations, preamble, transport, handling, unpacking, and basic safety.

Usage Guidelines and Training

Details loading/unloading precautions, probe use, and personnel training requirements.

Installation

Technical Data and Positioning

Includes plate data, dimensions, and placement requirements for the appliance.

Environmental and Electrical Requirements

Specifies room conditions, air exchange, power needs, and connection standards.

Connections, Drains and Safety Systems

Details refrigeration connections, condensation drain, and safety system information.

Disposal and Refrigerant Safety

Covers machine disposal guidelines and R404a gas safety precautions.

Operation

Blast Chiller Cycles and Usage

Explains how to use the blast chiller and describes the available cycles.

Control Panel and Operation Modes

Details the touch screen control panel, manual/automatic cycles, and defrosting.

Operational Advice and Parameter Settings

Provides tips for loading, temperature, preservation, and programming parameters.

Sanigen Sanitization System

Explains the Sanigen system for air and surface sanitization within the chamber.

Maintenance and Troubleshooting

Routine Cleaning and Maintenance

Covers daily cell cleaning, weekly cleaning, and evaporator washing procedures.

Condenser Care and Condensation Handling

Details cleaning the condenser unit and managing condensation drainage.

Troubleshooting Alarms and Issues

Lists alarms, visual diagnostics, and common malfunctions with possible solutions.

Accessing Components for Servicing

Guides on how to access front circuit board, electric control board, and condensing plant.

irinox ICY S Specifications

General

Brand	irinox
Model	ICY S
Category	Refrigerator
Language	English

Related product manuals

Preview: irinox ICY Series

irinox ICY Series

Preview: irinox CP One

irinox EasyFresh

irinox CP Multi Series