12
Cleaning and maintenance
Continued
Removing the battery
■
Battery removal
Use up the battery completely before removing it.
the swivel has been pushed down.)
!
Push the vibration surface of the mop
screws in six places)
#
Push the vibration surface of the mop
are screws in four places)
$
R
emove the connector and take out the battery
Battery
Connector
●
After the battery has been removed, do not recon-
nect it to the mop head.
Doing so
■
Mop pads
!
Remove the mop pads
#
Rinse the mop pads with water
• Wash your hands using tap water. If there is dirt,
neutral cleaning agent.
※
Do not use a washing machine. Do not wash to-
gether with other laundry.
※
Do not rub or knead the mop pads forcefully. Doing
so may cause fraying.
$
Remove all the water from the mop pads,
and dry it out in the shade
• Remove all the water, and dry out in the shade.
※
Do not wring out forcefully.
●
Do not use a hairdryer, iron, or dry-
ing machine to dry mop padss. Or
the heat may cause the mop pads to
lose its shape.
About used batteries
●
Remove the used battery and take it to the nearest bat-
tery recycling location. Do not throw away used batter-
ies as general household waste.
●
After removing the battery, use tape to insulate the
two ends of the battery connector.
Recycling lithium-ion batteries
●
U
sed batteries must be recycled. Also,
abide by the following.
• Do not throw away used batteries as
general waste.
• D
• Do not disassemble.
• Do not put used batteries in places with
high temperatures.
• D
o not use in any other machines or devices.
To Next Page
Loading...