Why is my IRIS Receiver remote control not working?
If your IRIS Receiver remote control isn't working, the battery may be exhausted, so try changing to a new battery. Alternatively, the remote control unit may not be correctly pointed at the front panel or may be too far away. Try adjusting the way you hold the remote control unit and move closer to the panel.
What to do if my IRIS Receiver screen shows 'No Signal'?
If your IRIS Receiver screen displays 'No Signal', the DVB-S cable might not be connected. Plug in the DVB-S cable. Also, the settings might be incorrect, so set up the correct parameters.
How to fix no sound from the IRIS 2300HD speaker?
If there's no sound from your IRIS Receiver speaker, check the audio cable connection; it may be missing or incorrect. Connect the audio cable correctly. Also, the sound may be muted, so switch on the correct volume control. Finally, the sound track may be incorrect, so try another sound track.
Why does the image on my IRIS 2300HD suddenly stop or become mosaic?
If the image on your IRIS Receiver suddenly stops or becomes mosaic, the signal may be too weak. Try to strengthen the signal.
What to do if my IRIS 2300HD Receiver has only sound, but no image on the screen?
If your IRIS Receiver has sound but no image, the program might be a radio program. Press the key to shift into TV mode.
To Next Page
General