IRIS 2300HD

37
6.2.2. Satellite List
Press [Up/Down] to move the highlight from the satellite list at the Up side to the satellite parameter
area at the Down side. Press [Menu]/[Exit] to return to the Installation Menu.
When a satellite is highlighted, press [OK] to select or de-select the satellite.
1- RED
You can add the satellite.
2- GREEN
You can edit the satellite.
3- YELLOW
You can delete the satellite.
4- BLUE
You can scan the satellite.
5- FAV
You can jump to antenna setting.
6.2.3. TP list
Press [Up/Down] to select the TP. Press [Menu]/[Exit] to return to the Installation Menu.
When a TP is highlighted, press [OK] to select or de-select the TP.