5 6
OPERATION INSTRUCTIONS HOW TO USE
MODE
Use For Temperature Settings Running Time Reference Page
WINTER
Warming blankets in
colder seasons
High Temperature Air
(approx. 149°F/65°C)
60 minutes
6
SUMMER
Warming blankets in
hotter seasons
High Temperature Air
(approx. 149°F/65°C)
------------------
Remove hot air by
Air Blast
60 minutes
------------------
20 minutes
WARM-UP
Warming blankets before
sleep in colder seasons
High Temperature Air
(approx. 149°F/65°C)
20 minutes
DUST MITE
ELIMINATION
Eliminate dust mites
High Temperature Air
(approx. 149°F/65°C)
100 minutes
Automatic Warming Mode
Run the blanket warmer with the air temperature and time predetermined by each mode.
Manual Mode
Select the temperature and running time.
OCCASION
Temperature Air Temperature Indicator Time Reference Page
SHOES
(CLOTH)
High Temperature
(approx. 149°F/65°C)
Red 60 minutes 8
SHOES
(LEATHER)
Air Blast
(about room temperature)
Blue 120 minutes 8
CLOTHES
Low Temperature
(approx. 122°F/50°C)
Yellow 75 minutes 9
WARMING
CLOSETS
Low Temperature
(approx. 122°F/50°C)
Yellow 90 minutes 10
* You can also warm the blanket in manual mode.
Dry Blanket / Warm Blanket / Eliminate Dust Mites
This product can dry and warm blankets.
Please make sure the blanket the product is being used on can withstand temperatures higher
than 158°F/70°C. The warm air temperature may cause damage to the performance
of the blanket, such as low repulsion, pilling, etc.
CAUTIONS
Twin / Full
• Mattress: 39.4-82.7 in/100-210 cm (6.6 lbs./3 kg)
• Blanket: 59.1-82.7 in/150-210 cm (6.6 lbs./3 kg)
Queen / King
• Mattress: 55.1-82.7 in /140-210 cm (8.8 lbs./4 kg)
• Blanket: 74.8-82.7 in /190-210 cm (8.8 lbs./4 kg)
Blanket Size Indication
(This product can warm sheets and blankets together.)
1 Unfold the hose and open the air ap at the hose tip until it is locked into place, then place the product
on the blanket with the operation panel facing upwards.
Open
TIMER
TEMPERATURE
START/ON
CLEAR/OFF
PRESET FUNCTIONS
WINTER SUMMER
WARM UP
Dust Mite Eliminator
MODE
TIME MINS
SETTINGS
POWER SUPPLY
About the Air Flap
You can expand the coverage of warm air by making space under the blanket.
• Fully stretch out the hose.
• This product will stop operating if it is laid down with the air entry port on the right side
facing down.
• Ventilate the room frequently as moisture is released from the blanket.
• Keep the side air entry port at least 6 in/15 cm from the wall.
• Place a large towel between the blanket and floor before drying or warming.
(Condensation may occur due to the moisture between the floor and blanket).
PRECAUTIONS
2 Warm the blanket.
Insert the edge of the blanket into the space between the main body
and hose.
*Please do not pull the blanket by force, otherwise it may cause
damage to the blanket and air flap.
Hold down firmly to prevent air leakage between the hose and blanket.
• Please do not place the blanket on the main body or block the air entry ports.
• The non-overlapped area between the mattress and blanket may not heat sufficiently.
• This product cannot solely dry a mattress. Make sure to place the blanket on the hose
before use.
CAUTIONS
Air entry port
TIMER
TEMPERATURE
START/ON
CLEAR/OFF
PRESET FUNCTIONS
WINTER SUMMER
WARM UP
Dust Mite Eliminator
MODE
TIME MINS
SETTINGS
POWER SUPPLY
To Next Page
Loading...
Need help?
General