7 8
3 Insert the power plug securely into the electric socket.
In standby mode, press any key to light up the power indicator,
and it will then enter mode selection.
4 Select automatic warming mode.
Press the MODE button to select desired mode.
5 Press “START/ON” button.
This product will display the remaining time after it starts running. It will stop heating
after set time has run out, and then it will cool down the main body and hose with a
20 second air blast before it stops running.
• During and immediately following use, do not use the blanket or allow pets on
the blanket. Doing so may cause burns.
• Do not unplug the power plug while product is running.
• Press the “CLEAR/OFF” button if you want to stop warming. Product will
stop warming and will blast air for 20 seconds, and then the product will stop
running.
• The power indicator will turn off 5 minutes after use.
• If the warmer does not warm the whole length of the blanket or does not reach
the corners, please insert the hose on the other side of the blanket and run the
product again.
6 Put the product away after use.
• Firmly grip the power plug to unplug it from the electric socket.
• Close the air flap and fold the hose.
• Bundle up the power cord.
Bend
Press
gently
to store
hose
Power cord
Cover
(Back)(Front)
TIMER
TEMPERATURE
START/ON
CLEAR/OFF
PRESET FUNCTIONS
WINTER SUMMER
WARM UP
Dust Mite Eliminator
MODE
TIME MINS
SETTINGS
POWER SUPPLY
TIMER
TEMPERATURE
START/ON
CLEAR/OFF
PRESET FUNCTIONS
WINTER SUMMER
WARM UP
Dust Mite Eliminator
MODE
TIME MINS
SETTINGS
POWER SUPPLY
TIMER
TEMPERATURE
START/ON
CLEAR/OFF
PRESET FUNCTIONS
WINTER SUMMER
WARM UP
Dust Mite Eliminator
MODE
TIME MINS
SETTINGS
POWER SUPPLY
→ → →
MODE
PRESET FUNCTIONS
WINTER SUMMER
WARM UP
Dust Mite Eliminator
Dust Mite
Eliminator
Warm Up
Summer
Winter
(High temperature air 100 minutes)
(High temperature air 20 minutes)
(High temperature air 60 minutes + air blast 20 minutes)
(High temperature air 60 minutes)
START/ON
HOW TO USE
Drying Shoes (manual mode)
Please close the air flap before use.
1 Add the shoe drying attachment to the end of the hose.
2 Insert the shoe drying attachment into the shoes.
3 Insert the power plug securely all the way into the electric socket.
In standby mode, press any key to light up the power indicator
and enable mode selection.
4 Manual mode selection.
Select the running temperature and time according to the type of shoes.
TIMER
TEMPERATURE
START/ON
CLEAR/OFF
PRESET FUNCTIONS
WINTER SUMMER
WARM UP
Dust Mite Eliminator
MODE
TIME MINS
SETTINGS
POWER SUPPLY
TIMER
TEMPERATURE
START/ON
CLEAR/OFF
PRESET FUNCTIONS
WINTER SUMMER
WARM UP
Dust Mite Eliminator
MODE
TIME MINS
SETTINGS
POWER SUPPLY
Tips for faster drying
• Remove excess water with a dry cloth.
• Loosen shoelaces and place them in the shoes.
Red
TEMPERATURE
TEMPERATURE
Blue
TIMER
TIME MINS
TIMER
TIME MINS
Press “TEMPERATURE” button to select
“High Temperature” (Red).
Press “TIMER” button to set remaining time to
60 minutes.
Press “TEMPERATURE” button to select
“Air Blast” (Blue).
Press “TIMER” button to set remaining time to
120 minutes.
Cloth Shoes Leather Shoes, Boots
• The drying time differs due to wet conditions, shoe materials and types, room
temperature, and moisture levels. Please dry again if shoes are not sufficiently dried.
• Leather, artificial leather and vinyl shoes may deform and change color from warm
temperatures. Please make sure to only select “Air Blast” (Blue) mode.
PRECAUTIONS
*It is more efficient to use a mattress cleaner after dust mite elimination.
To Next Page
Loading...