IrisVision LIVE - Television Mode Voice Commands

42
Enabling and Disabling Voice Prompts
• Say “Enable voice prompts” to enable voice prompts
for speech notification – as “device inserted correctly”,
“charging confirmation”, “battery level”, and so on.
• Say “Disable voice prompts” to disable voice prompts
for speech notification.
Mode-Specific Commands
• Say “Help” for general instructions on how to use the
current mode.
• Say “Turn on flashlight” to turn on the flashlight (if the
mode allows).
• Say “Turn off flashlight” to turn off the flashlight (if the
flashlight is on).
• Say “Take photo” to take a photo in any mode that
supports snapshot.
• Say “Exit photo” to exit full-screen photo view.
Television Mode Voice Commands
• Say “Set exposure to <value>” to set the exposure
compensation to any of the following available values:
o “Theater” is the default value.
o “Ambient” is normal camera exposure.
o “Very Dark” is 3 levels below ambient.
o “Dark” is 2 levels below ambient.
o “Dim” is 1 level below ambient.
o “Bright” is the brightest value.