6 For more information, visit global.irobot.com
EN
Care and Maintenance
Part Care Frequency Replacement Frequency*
Bags - Bags should be replaced when
prompted by the LED indicator/app.
Charging Contacts
Visual Docking Target
Once every month -
Blower Cover inside canister Once every month (remove debris
from blower cover)
-
Bin Wash bin as needed -
Filter Clean once a week (twice a week if
you have a pet). Do not wash
Every 2 months
Full Bin Sensor Clean every 2 weeks
Front Caster Wheel Clean every 2 weeks Every 12 months
Edge-Sweeping Brush and
Multi-Surface Brushes
Clean once a month (twice a
month if you have a pet)
Every 12 months
Sensors and Charging Contacts Clean once a month -
Mopping pad Clean after a mopping job After 30 washes
Wick cap Replace if dirty or shows wear -
To keep your robot running at peak performance, perform the procedures on the following pages.
Care and Maintenance Instructions
* Replacement frequency may vary. Parts should be replaced if visible wear appears.
Note: iRobot manufactures various replacement parts and assemblies. If you think that you need a
replacement part, please contact iRobot Customer Care for more information.
1
2
3
Emptying the Bin
Press bin release button to remove bin.
Open bin door to empty bin.
Place bin back in the robot.
To Next Page
Loading...
Need help?
General
