6
7
HazMat Kit
Add hazardous materials
detection to your PackBot.
Multiple integrated
sensors provide TIC, TIM,
Blood Blister, VOC,
Radiological and Temperature/
Humidity detection and
reporting. Includes MultiRAE
®
sensor, LCD Sensor, Radiac
sensor, calibration accessories
and extra filter packs for
MultiRAE, sieve packs,
confidence tester, battery
cassette for LCD, accessory
brick, payload assembly with
Temp/Humidity Sensor,
sealed hard case for sensors
and accessories, rugged
shipping cases, user manual
and documentation and
Aware
®
2 software license.
Additional hardware and
software upgrade may be
required. Available in
late 2009.
Part # 4185339
Robot Accessories
QuickClamp
Accessory Mount
Modular clamp system
attaches to PackBot arm.
Supports various
disrupters and tools,
including PAN, Proparms,
and Richmond. Once installed,
tools and disrupter mounts
attach and remove in seconds
without tools. Users may adapt
new tools to standard mount.
Part # 14065
QuickClamp Fireset
without Accessory
Connector
Allows for fast and reliable
installation and removal of a
variety of head-mounted
accessories, including
disrupters. Fireset includes
binding posts for electrical
initiation of pyrotechnic devices
over a secure, encrypted Safe
Firing System. Users may
adapt new tools to this
standard mount.
Part # 14107
QuickClamp Fireset with
Accessory Connector
Allows for fast and reliable
installation and removal of
a variety of head-mounted
accessories, including
disrupters. Fireset includes
binding posts for electrical
initiation of pyrotechnic devices
over a secure, encrypted Safe
Firing System. Includes an
accessory connector for
expansion or third-party
developers. The connector
provides power and receives
data and video. Users may
adapt new tools to this
standard mount.
Part # 18207
QuickClamp Mount with
Accessory Connector
Allows for fast and reliable
installation and removal of
a variety of head-mounted
accessories. Includes an
accessory connector for
expansion or third party
developers. The connector
provides power and receives
USB and video data. Users
may adapt new tools to this
standard mount.
Note: Disrupters cannot be
fired from a robot equipped
with this accessory.
Part # 19468
Robot Accessories
PackBot Blast Shield
with Clutch Upgrade Kit
Upgrade the blast shield of
your PackBot EOD. Improved
clutch design provides longer
product life.
Part # 18215
Blast shield only, other
components not included.
Enhanced Awareness
Payload (EAP)
Add more cameras, sensors,
and functionality to your iRobot
510 FasTac. The EAP, which
mounts in the robot’s front bay,
features a wide-angle drive
camera, two-way audio, white
and infrared illumination
and an accessory port.
Part # 4207006
For more information or a quote, contact iRobot at sales@irobot.com or toll-free in the U.S. at
888.776.2687. International customers, call +(1) 781.430.3090.
LWIR Thermal
Camera Kit
Compact, lightweight camera
features large field of view
and provides increased
situational awareness.
Close-to-medium range
detection and identification
in fog, smoke, low light and
no light. Additional software
may be required.
Part # 4177974
ICx Fido
®
Explosives
Detection Kit
Add remote explosives detection
capability to PackBot to protect
personnel. Sensor employs
ultra-sensitive vapor detection.
Sensor data is relayed to the
PCC or OCU in visual and audio
formats. Sensor data is relayed
to the operator controller unit in
visual and audio formats. Fido
sensor can be removed and
used for hand held detection
purposes. Kit includes payload-
to-robot adaptor. Additional
software may be required.
Part # 19479
To Next Page
Loading...
Need help?
General
