12
13
BB-2590/U Battery
Charger, 8 Bay, High Rate
Portable battery charger for field
or depot use. Charges 8 batteries
in 8 hours or less with easy-to-
follow LED lighting sequences.
(Accommodates four charger
adapters, each with 2 slots.
Charges 2 batteries simultane-
ously, with 6 batteries in queue.)
Charges and maintains a variety
of batteries using the appropriate
mating adapter. Charging system
is upgradeable in the field or a
desktop environment through the
RS232 port and a computer link.
(Note: Requires four Dual
BB-2590/U Battery Charger
Adapters - Part # 4180844.)
Part # 18587
Power Accessories
Power Accessories
For more information or a quote, contact iRobot at sales@irobot.com or toll-free in the U.S. at
888.776.2687. International customers, call +(1) 781.430.3090.
Dual BB-2590/U Battery
Charger Adapter
Used with the appropriate
battery charger, adapter charges
one or two BB-2590/U batteries
in 3.5 hours or less. Adapter
required for use with the
BB-2590/U Battery Charger,
Dual, High Rate (Part # 18586)
and BB-2590/U Battery Charger,
8 Bay, High Rate (Part # 18587).
Part # 4180844
BB-2590/U Battery
Charger, Single,
Low Rate
Single-station battery charger
for BB-2590/U batteries. Charges
BB-2590/U within 10 hours.
Part # 18584
BB-2590/U Battery
Charger, Single,
Medium Rate
Single-station battery charger can
be powered from 115/230 Vac,
50/60 Hz mains power or from
12Vdc automotive power sources.
Unit charges BB-2590/U in six
hours or less.
Part # 18585
BB-2590/U Battery
Charger, Dual, High Rate
Portable battery charger designed
for field or depot use. Charges
two batteries simultaneously
in 3 hours or less with easy to
follow LED lighting sequences.
Charges and maintains the range
of military communication and
electronic (CE) batteries using
designated adapter. Charging
system is upgradeable in the field
or a lab environment through the
RS232 port. (Note: Requires one
Dual BB-2590/U Battery Charger
Adapter - Part # 4180844.)
Part # 18586
BB-2590/U Lithium
Battery
Rechargeable, 24V lithium ion
battery with state-of-charge
display. Use of two BB-2590/U
batteries per cradle recommended
for optimum performance. Check
with shipper for domestic and
international shipping guidelines.
(Some robots also require the
BB-2590/U Battery Retrofit
Kit – Part # 18616.)
Part # 4151798
RCV BB-2590/U Battery
Retrofit Kit
Retrofits PackBot robots
enabling use of the BB-2590/U
Lithium ion rechargeable
battery in current use. Plug-and-
play kit includes a cradle that
accommodates two batteries.
Use of two BB-2590/U batteries
recommended for optimum
performance. BB-2590/U
batteries not included.
Part # 18616
Inverter 12/24 Volt for
PCC
Allows mobile operation of the
PCC without batteries. PCC is
powered by 12 Volt or 24 Volt
on-board vehicle power source.
Includes a car/truck connect-
ing cable (plugs into cigarette
lighter), a PCC connecting
cable, and one inverter. Accord-
ing to CE Directive 93/68/EEC,
the device bears the CE-Label.
Sold directly from ELP and war-
ranty information is provided by
the manufacturer.
Visit www.elp-gmbh.de
AC Adapter Kit
for PCC
Produces regulated 24 Volts
for PCC external power.
Kit includes AC adapter that
accepts 120-240 AC Voltage
input range. Plugs into
standard PCC external
24 Volt DC-in connector.
Modular cord set allows
adaptation to local mains.
Part # 13618
DC Power Cable
for PCC
Allows PCC to be powered
directly by 24 Volt military
vehicles. 3m long cable
allows flexible cable routing.
Plugs into standard PCC.
External 24 Volt DC-in
connector. Uses
tinned leads.
Part # 12128
AC Power Cable
for PCC
Adapts to your MicroCharger
Power Cable to allow you to
power the PCC from an AC
wall outlet.
Part # 12129
Includes cable only;
AC Adapter not included.
To Next Page
Loading...
Need help?
General
