14
15
Communications Accessories
2.4 GHz Radio
OCU Module
Enables compatibility between the
2.4 GHz radio and the Operator
Control Unit. Includes 2.4 GHz
Radio OCU module and antenna.
Part # 4187446
(for PackBot 510 configurations)
4.9 GHz Communications
Package for Laptop OCU
Includes 4.9 GHz radio payload
with integral antenna that fits in
the PackBot payload bay and ex-
ternal radio with integral antenna
that mounts to the outside of OCU
Part # 4182668
(for PackBot 510 configurations)
2.4 GHz Long Range
Antenna Kit
Increases PackBot’s wireless
radio communications from
~300m to ~800m (line of sight).
Uses two high-gain directional
antennas. Two 3.5m antenna
cables included. Waterproof
and dustproof design. Cables
screw onto standard PCC
antenna connectors.
Vehicle Mounted Antenna
Versatile clamp attaches
antenna to military vehicles and
structures. Disassembles into
compact transportable modules.
Elevates antennas 2.5m above
clamp mounting point.
Part # 9484
Tripod Mounted Antenna
Includes tripod with
adjustable legs.
Part # 13971
CommSelect
TM
5140 Kit
Communications link providing
improved radio performance
that is less susceptible to
interference from sources of
2.4 GHz noise. Includes radio
payload with integral antenna
that fits in the PackBot payload
bay and external radio with
integral antenna that mounts
to the outside of PCC.
Part # 4153795
Power Accessories
For more information or a quote, contact iRobot at sales@irobot.com or toll-free in the U.S. at
888.776.2687. International customers, call +(1) 781.430.3090.
Universal SmartSpool™
Fiber Optic Spooler
Allows operator to drive robot with
fiber optic cable. Includes 820 ft.
(520m) of optical fiber, automatic
payout and rewind to minimize
tangle and excess tension.
Software may be required.
Part # 18335
Fiber-Ethernet Converter
Box and OCU Fiber
Module
Enables compatibility between
the Universal SmartSpool™ Fiber
Optic Spooler and the Operator
Control Unit.
Part # 4180888
(for PackBot 510 configurations)
Image shown is for OCU
Fiber Module.
NiCad Battery Pack
with LCD Battery
Power Display
Compatible with all PackBot
robots and selected robot
control units, such as
the PCC.
Part # 11076
NiCad Battery
Strap Kit
Increases run time of the
PackBot by allowing
installation of additional
NiCad batteries in one
(or both) of the two rear
battery ports. (One kit per
battery required.)
Part # 8009
Cigarette Lighter Adapter
for MicroCharger
Allows direct connection of the
MicroCharger to the on-board
vehicle power source, whether
it’s 12 Volt or 24 Volt. 2 meter
connecting cable allows flexible
cable routing. Includes 2
connecting cables. Sold
directly from ELP and warranty
information is provided by
the manufacturer.
Visit www.elp-gmbh.de
Single
MicroCharger Kit
Charges NiCad Battery Pack.
Charger housing employs
dustproof / waterproof design.
24 Volt DC input option for
military vehicle installation.
Indicator LEDs provide charger
status. AC Adapter accepts
120 - 240 AC Voltage input
range. Modular cord set allows
adaptation to local mains.
Mounting tabs allow charger
housing to be positively
secured. Kit includes case.
Part # 12863
Dual
MicroCharger Kit
Charges NiCad Battery Pack.
Charger housing employs
dustproof / waterproof design.
24 Volt DC input option for
military vehicle installation.
Indicator LEDs provide charger
status. AC Adapter accepts
120 - 240 AC Voltage input
range. Modular cord set
allows adaptation to local
mains. Mounting tabs allow
charger housing to be
positively secured.
Kit includes case.
Part # 13086
To Next Page
Loading...
Need help?
General
