EN
Roomba Combo® j9+ Owner’s Guide 5
Mopping
• Your robot is able to both vacuum and mop at the same time.
• Your Clean Base will refill the water tank on your robot. When the Refill Tank is
empty, the Error LED Indicator will turn solid red.
• When your robot detects carpet during it’s cleaning job, it will lift and tuck the
mopping pad away.
4
Attach mopping pad to robot.
STARTING A VACCUM AND MOP CLEANING JOB FROM YOUR CLEAN BASE® Auto-Fill Dock
1 32
Place tank back in Clean Base and close the
door making sure it is completely closed.
Fill tank with water or compatible
cleaning solution.
Use pull tab to open door. Remove the
Refill Tank.
WARNING: To prevent damaging your robot, do
not manually stow the mopping pad plate onto the
pad shelf.
Note: After completing your mopping and vacuum cleaning job, make sure to empty
the robot bin water tank and replace the mopping pad.
Important: See page 6 for
cleaning solution compatibility
To Next Page
Loading...
