iRobot RCC-Y1 - Page 15

For more information, visit global.irobot.com14
EN
Cleaning the Edge-Sweeping Brush
Pull to remove the Edge-Sweeping Brush. Remove
any hair or debris using the cleaning brush, then
reinstall the Edge-Sweeping Brush.
Cleaning the Multi-Surface Brush
1
Press the brush frame release tabs and lift to
remove brush frame
2
Remove the Multi-Surface Brush
3
Remove any hair or debris from the Multi-Surface
Brush using the cleaning brush
4
Reinstall the Multi-Surface Brush and Brush
frame in the robot