500 Series Quick Start Guide
www.irobot.com
An easy step-by-step guide
to using the iRobot Roomba.
Maintain Roomba
Perform these maintenance tasks as needed
See Owners Manual for detailed product
instructions.
Instructional photos are available at
www.irobot.com/usetips.
© 2008 iRobot Corporation, 63 South Avenue, Burlington, MA 01803. All rights reserved.
iRobot, Virtual Wall and Roomba are registered trademarks of iRobot Corporation.
Home Base, Dirt Detect and Lighthouse are trademarks of iRobot Corporation.
U.S. Pat. Nos. 6,594,844; 6,690,134; 6,883,201; 6,809,490; 6,956,348;
7,155,308; 7,173,391.
132.06
1
Remove and empty
Roomba’s bin
2
Clean Roomba’s filter
compartment
3
Clean Roomba’s brushes
A. Remove brush guard by pulling
both yellow tabs.
B. Remove Roomba’s brushes. Remove
brush caps and use the included
cleaning tool to remove any hair wrapped
around Roomba’s brushes.
C. Remove and clean the hair and dirt
from Roomba’s yellow brush bearings.
*Replace filter every two months.
Quick Start Guide
Press button and
pull to remove bin.
Empty bin
A. Clean or replace filter*
B. Clean filter
compartment.
Other patents pending.
Flexible Brush
Brush Bearings
Brush Caps
Main Brush
To Next Page
