8 For more information, visit global.irobot.com
EN
Care and Maintenance
Care and Maintenance Instructions for Your Robot
To keep your robot at optimal performance, make sure you periodically
perform the following basic care & maintenance.
There are additional instructional videos in the iRobot Home App. If you
notice the robot picking up less debris from your floor, empty the bin, clean
the filter and clean the brushes.
Part Care Frequency Replacement Frequency*
Mopping Pad Clean after a mopping job After 30 washes.
Bin Wash bin as needed
Filter Clean once a week (twice a
week if you have a pet). Do
not wash.
Every 2 months
Front Caster Wheel Clean every 2 weeks Every 12 months
Edge-Sweeping Brush
and Multi-Surface
Brushes
Clean once a month (twice a
month if you have a pet)
Every 12 months
Full Bin Sensor Clean every 2 weeks -
Charging Contacts Clean every 2 weeks -
Sensor, Camera Window
and Pad Shelf
Clean once a month -
Note: iRobot manufactures various replacement parts and assemblies. If you think
you need a replacement part, please contact iRobot Customer Care for more
information.
* Replacement frequency may vary. Parts should be replaced if visible wear appears.
HAND WASHING
Thoroughly wash the pad with
warm water.
MACHINE WASHING
Wash using the warm cycle, then air
dry. Do not put in dryer. Do not wash
with delicates.
Cleaning the Mopping Pad
Emptying the Bin
Note: You can clean your mopping pads two ways: either by hand washing, or in a
washing machine.
1 2 3
Press bin release
button to remove
bin.
Open bin door to
empty bin.
Place bin back in
the robot.
To Next Page
Loading...
