iRobot Roomba Combo j9+ - Cleaning Full Bin Sensors; Cleaning Charging Contacts, Sensors, Camera, Pad Shelf

EN
Roomba Combo® j9+ Owner’s Guide 11
Cleaning the Full Bin Sensors Cleaning the Charging Contacts, Sensors, Camera Window
and Pad Shelf
1
2
3
4
Remove and empty
the bin.
Wipe the inner
sensors with a clean,
dry cloth
Wipe the bin door with
a clean, dry cloth.
Clear any debris from
the vacuum path.
Closed Door Opened Door
Wipe components with a clean,
dry cloth.
Important: Do not spray cleaning
solution or water onto the
sensors or sensor openings.
CHARGING CONTACTS SENSORS
PAD SHELF
CAMERA WINDOW