EN
Roomba Combo® j9+ Owner’s Guide 13
Washing the Rell Tank Cleaning the Charging Contacts, IR
Window, and Visual Docking Target
1
2
3
Use pull tab to open door. Remove
the Refill Tank
Rinse the Refill Tank using warm
water.
Refill the tank and place back in
the Clean Base® Auto-Fill Dock
Inspect the components to make sure that they are
clear of debris. Wipe with a clean, dry cloth.
Important: Do not spray cleaning solution or water
onto the sensors or sensor openings.
CHARGING CONTACTS IR WINDOW VISUAL DOCKING TARGET
Note: To expose the charging
contacts, press and hold the
contact button
To Next Page
Loading...
