iRobot Roomba i3 User Manual

6 For more information, visit global.irobot.com
EN
Washing the Bin
Cleaning the Full Bin Sensors
Wipe the inner sensors with a
clean, dry cloth
Make sure bin is completely dry. Reinsert
filter and place bin back in the robot.
Wipe the bin door with a clean, dry cloth.
2
3
3
Important:
Do not wash the filter.
Remove the filter before washing the bin.
Release the bin, remove the filter,
and open the bin door.
Remove and empty the bin.
1
1
Note:
Bin is not dishwasher safe.
Use a small screwdriver to loosen the
screw holding the Edge-Sweeping
Brush in place.
Pull to remove the Edge-Sweeping
Brush. Remove any hair or debris,
then reinstall the brush.
Cleaning the Edge-Sweeping Brush
1
2
Rinse the bin using warm water.
2
Closed Door
Opened Door

iRobot Roomba i3 Specifications

General

Dust sensor	Yes
Noise level	- dB
Wet mopping	No
Brush material	Rubber
Dust capacity (total)	- L
HEPA filtration system	-
Shape	Round
Product color	Black, Grey
Battery capacity	- mAh

Weight and Dimensions

Height	95 mm
Diameter	335 mm