6 For more information, visit global.irobot.com
EN
Part Care frequency Replacement Frequency*
Bin Wash bin as needed
Filter Clean once a week (twice a week if
you have a pet). Do not wash.
Every 2 months
Full Bin Sensor Clean every 2 weeks
Front Caster Wheel Clean every 2 weeks Every 12 months
Edge-Sweeping Brush and
Multi-Surface Brushes
Clean once a month (twice a month
if you have a pet)
Every 12 months
Sensors and Charging
Contacts
Clean once a month
Camera Window Clean and inspect once a month
Bags Bags should be replaced
when prompted by the
LED indicator/app.
Dock Charging Contacts
and Visual Docking Target
Once every month
Blower Cover inside
canister
Once every month (remove debris
from blower cover)
Care and Maintenance Instructions
To keep your robot running at peak performance, perform the procedures
on the following pages. There are additional instructional videos in the
iRobot Home App. If you notice the robot picking up less debris from your
oor, empty the bin, clean the lter and clean the brushes.
Care and Maintenance
Note: iRobot manufactures various replacement parts and assemblies. If you
think you need a replacement part, please contact iRobot Customer Care
for more information.
Emptying the Bin
Open bin door to empty bin.
Press the bin release
button to remove bin.
1
2
Place bin back in the robot.
3
Cleaning the Filter
Remove the bin. Remove the
lter by grasping both ends
and pulling out.
Remove debris by tapping
the lter against your trash
container.
Reinsert lter with ridged
grips facing out. Place bin
back in the robot.
1
2
3
Important: The robot will not
run if the lter is not installed
correctly. Replace the lter every
two months.
To Next Page
Loading...
