iRobot Roomba j6+ - Page 12

Roomba
®
j6+ Owner’s Guide 7
EN
Clear any
debris from the
vacuum path.
4
Washing the BinCleaning the Full Bin Sensors
Wipe the inner
sensors with
a clean, dry
cloth
Make sure that bin is completely dry.
Reinsert lter and place bin back in
the robot.
Wipe the bin door with a clean,
dry cloth.
2
3
3
Important: Do not wash the lter. Remove the
lter before washing the bin.
Release the bin, remove the lter, and
open the bin door.
Remove and empty the bin.
1
1
Note: Bin is not dishwasher safe.
Use a coin or small screwdriver to remove
the screw holding the Edge-Sweeping
Brush in place.
Pull to remove the Edge-Sweeping Brush.
Remove any hair or debris, then reinstall
the brush.
Cleaning the Edge-Sweeping Brush
1
2
Rinse the bin using warm water.
2
Closed Door
Opened Door