EasyManua.ls Logo

iRobot RoombaCombo i5 User Manual

iRobot RoombaCombo i5
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Getting started | Démarrage | Inicio
Introduzione | Erste Schritte | Pierwsze kroki
Get ready
To start, you’ll need your robot, Home Base charging
station, drip tray, and power cord.
Position the Drip Tray & Home Base
Place drip tray and charging station on hard surface
ooring, near an outlet, in an area with good Wi-Fi
coverage. Keep the area around the charging station
free of clutter.
EN
Install the Drip Tray
Position your drip tray on a at surface. Slide the
front of your Home Base under the clip at the center
of the drip tray.
Préparation
Pour commencer, vous aurez besoin de votre
robot, base de chargement HomeBase, du bac de
récupération et du cordon d’alimentation.
Positionnement du bac de récupération et
de la HomeBase
Placez le bac de récupération et la base de
chargement sur une surface dure, près d’une prise,
dans une zone où la couverture Wi-Fi est bonne.
Assurez-vous qu’aucun objet encombrant ne se trouve
autour de la base de chargement.
FR
Installation du bac de récupération
Placez le bac de récupération sur une surface plane.
Faites glisser l’avant de votre HomeBase sous le clip
situé au centre du bac de récupération.
Prepárate
Para comenzar, necesitarás la estación de robot,
carga Home Base, la bandeja de goteo y el cable de
alimentación.
Coloca la bandeja de goteo y la Home
Base
Coloca la bandeja de goteo y la estación de carga
en el suelo o sobre una supercie dura, cerca de una
toma de corriente y en una zona con buena cobertura
Wi-Fi. Mantén despejada la zona de alrededor de la
estación de carga.
ES
Instalación la bandeja de goteo
Coloca la bandeja de goteo sobre una supercie
plana. Desliza la parte frontal de la Home Base por
debajo del clip situado en el centro de la bandeja
de goteo.
Preparazione
Per iniziare, sono necessari la robot, stazione di
carica Home Base, la vaschetta di raccolta e il cavo
di alimentazione.
Posizionare la vaschetta di raccolta e la
Home Base
Posizionare la vaschetta di raccolta e la stazione di
carica su pavimenti con superci dure, vicino a una
presa di corrente, in un’area con buona copertura Wi-
Fi. Tieni sgombra l’area intorno alla stazione di carica.
IT
Installare la vaschetta di raccolta
Posizionare la vaschetta di raccolta su una supercie
piana. Far scorrere la parte anteriore della Home Base
sotto la clip al centro della vaschetta di raccolta.
Vorbereitung
Als Erstes brauchst du die Roboter, Home Base
Ladestation, die Abtropfschale und das Stromkabel.
Positioniere die Abtropfschale und die
Home Base
Stelle die Abtropfschale und die Ladestation auf einer
festen Oberäche in der Nähe einer Steckdose in
einem Bereich mit guter WLAN-Abdeckung auf. Lass in
dem Bereich um die Ladestation herum nichts auf dem
Boden liegen.
DE
Bringe die Abtropfschale an
Stelle die Abtropfschale auf eine ebene Oberäche.
Schiebe die Vorderseite der Home Base unter den Clip
in der Mitte der Abtropfschale.
Przygotuj urządzenie
Aby rozpocząć, potrzebujesz robota, stacji dokującej
Home Base, tacy ociekowej i przewodu zasilającego.
Ustaw tacę ociekową i stację dokującą
Home Base
Umieść tacę ociekową i stację dokującą na twardej
powierzchni, w pobliżu gniazdka, w miejscu o
dobrym zasięgu sieci Wi-Fi. Nie umieszczaj żadnych
przedmiotów w pobliżu stacji dokującej.
PL
Zamontuj tacę ociekową
Umieść tacę ociekową na płaskiej powierzchni. Wsuń
przednią część stacji dokującej Home Base pod
zaczep na środku tacy ociekowej.
4ft / 1.5m1.5ft / 0.5m
4ft / 1.5m
Question and Answer IconNeed help?

Do you have a question about the iRobot RoombaCombo i5 and is the answer not in the manual?

iRobot RoombaCombo i5 Specifications

General IconGeneral
BrandiRobot
ModelRoombaCombo i5
CategoryVacuum Cleaner
LanguageEnglish

Summary

Getting Started

Install the Drip Tray

Instructions for attaching the drip tray to the Home Base.

Position Home Base and Drip Tray

Guidance on optimal placement of the charging station and drip tray.

Initial Setup and Charging

Connect the Charging Station

Steps to plug in the power cord for the charging station.

Activate Your Roomba

How to place the robot on the charging station to power it on.

Download iRobot Home App

Guide to obtaining and installing the mobile application.

Safety Information

General Safety Precautions

Essential warnings and advice for safe robot operation.

Safety Symbols and Indicators

Explanation of hazard alert symbols and their meanings.

Robot and Charging Station Safety

General Robot & Base Safety

Warnings for robot operation and charging station use.

Charging Station Specific Warnings

Safety guidelines for the Home Base charging unit.

Solution and Battery Safety

Cleaning Solution Safety

Precautions when using cleaning solutions with the robot.

Battery Safety and Shipping

Guidelines for battery handling, safety, and shipping procedures.

Operating Your Robot

Positioning the Home Base

Optimal placement guidelines for the charging station.

Charging Status and Indicators

Information on robot charging states and visual cues.

Connect to Wi-Fi and App

Steps for connecting the robot to Wi-Fi via the mobile app.

Cleaning Operations

Basic Cleaning Operations

How to initiate, pause, resume, and end cleaning cycles.

Understanding Troubleshooting Alerts

Interpreting robot alerts and error indicators for troubleshooting.

Accessories

Dual Mode Virtual Wall Barrier

Instructions for using the Virtual Wall Barrier accessory.

Combo Bin Installation

Install and Fill the Combo Bin

Steps for attaching the mopping pad and filling the bin.

Care and Maintenance

Maintenance Schedule and Bin Emptying

Recommended maintenance frequency and bin emptying process.

Cleaning the Robot Filter

Instructions for cleaning the robot's internal filter.

Component Cleaning Procedures

Clean Full Bin Sensors

How to clean the sensors associated with the dust bin.

Wash the Robot Bin

Step-by-step guide for washing the dust bin.

Clean Edge-Sweeping Brush

Instructions for cleaning the edge-sweeping brush.

Brush and Wheel Care

Clean Front Caster Wheel

Steps for cleaning the robot's front caster wheel.

Clean Multi-Surface Brushes

Guide to cleaning the primary multi-surface brushes.

Pad and Cap Care

Clean Sensors, Camera, and Contacts

Maintaining cleanliness of sensors, camera, and charging contacts.

Clean Mopping Pad

Instructions for washing the mopping pad.

Replace Wick Cap

Guide for replacing the wick cap on the mopping system.

Regulatory Information

Declarations and Radio Details

EU/UKCA compliance and radio module specifications.

Waste Disposal Guidelines

Information on proper and responsible product disposal.

Customer Support and Recycling Info

WEEE Recycling Organizations

List of contracted recycling partners by region.

iRobot Customer Care Contact Info

How to contact iRobot support for assistance.

Combo Bin Activation

Open iRobot Home App

Steps to launch the mobile application.

Add Your Product to App

Procedure for registering the robot within the app.

Scan QR Code for Activation

Using the QR code to activate the Combo Bin feature.

iRobot Limited Warranty

Warranty Overview and Terms

Summary of the limited warranty terms and conditions.

How to Make a Warranty Claim

Process for submitting a claim under the limited warranty.

Warranty Remedies and Exclusions

Details on what is covered and excluded by the warranty.

Liability Limitations

Legal constraints on iRobot's liability as per the warranty.

Related product manuals