IROX EBR707C - Set the Clock, Calendar & Language

ENG
55
SET THE CLOCK, CALENDAR & LANGUAGE
1. Press & hold [CLOCK] button for 2 seconds to enter clock setting mode.
Flashing 24 hours will appear.
2. Press [ ] or [ ] button to switch between 24 hours and 12 hours
format, and then press [CLOCK] button to conrm.
3. The hour digits will ash. Use the [ ] button to increase by one hour or
[ ] button to decease by one hour to your desired hours. Holding down
either button will change the increment unit rapidly. Press [CLOCK] button
to conrm.
4. The minute digits will ash. Use the [ ] button or [ ] button to set your
desired minutes. Holding down either button will change the increment
unit rapidly. Press [CLOCK] button to conrm.
Note: Every change of minute digit will automatically reset the seconds
to zero.
5. The year digit will ash and Yr icon appears. Press [ ] or [ ] button to
set your desired year. Press [CLOCK] button to conrm.
Note: Year range is from 2000 to 2099.
6. D and M icons will ash. Press [ ] or [ ] to select D M (Date Month) or
M D (Month Date) format. Press [CLOCK] button to conrm.
7. Month digits will ash. Press [ ] or [ ] button to set your desired
month. Press [CLOCK] button to conrm. Do the same to set Date.
Note: The weekday will be automatically calculated and displayed for the
date set above.
8. E digit will ash. Press [ ] or [ ] button to switch 5 languages display
of weekday (English/German/French/Spanish/Italian. See table 1). Press
[CLOCK] button to conrm.