IROX iClimber-DCX User Manual

iClimber
-
DCX
Instruction Manual

IROX iClimber-DCX Specifications

General

Resolution	240 x 240 pixels
Display	1.3 inch TFT
Battery Life	Up to 7 days
Compatibility	Android 5.0 and above, iOS 9.0 and above
Sensors	Sleep Monitor

Summary

1. INTRODUCTION

3. OPERATION ELEMENTS

3.1 LCD DISPLAY AND BUTTONS

Describes the watch's liquid crystal display and the four side buttons for operation.

3.2 OPERATION LOGIC OF BUTTONS

Explains the logic for button presses (single press vs. press and hold).

3.3 LOCKING THE BUTTONS (“KEY-LOCK”)

Details how to activate and deactivate the button lock feature to prevent accidental presses.

3.4 MEANING OF THE LCD ICONS

Explains the various icons displayed on the watch's LCD screen.

3.5 BEZEL

Describes the function of the rotating bezel for compass position finding.

3.6 BATTERY COMPARTMENT

Explains how to access and replace the watch battery.

4. FUNCTIONS AND OPERATION

4.1 TIME (TIME AND ALARM)

Details the watch's time display, second time zone, and alarm settings.

4.2 TIMER

Explains how to set and use the two independent timer functions.

4.3 SPORT (STOPWATCH, VERTIC-LOG, PEER)

Introduces the sport functions including stopwatch, VERTIC-LOG, and peer connectivity.

4.3.1 STOPWATCH with LAP and VERTIC-LOG function

Details the stopwatch operation with lap timing and VERTIC-LOG integration.

STOPWATCH with RUN function (FOOT-PEER)

Describes how to use the stopwatch with the FOOT-PEER for running data.

4.3.2 PEER Settings

Covers pairing and calibrating peripheral devices (PEERs).