22
USE AND MAINTENANCE MANUAL
EN
428000377137 FIJI
12. CONTROL PANEL
1
1 GENERAL SWITCH
2 LIGHTING SWITCH
3 ELECTRONIC CONTROL BOARD
ATTENTION
The electronic control board is installed already programmed. Any changes to the control board
settings can be carried out exclusively by qualied technical personnel.
START-UP (ON)
Activate the mains system master switch.
Plug the appliance in at the socket supplied by the customer,
ensuring that the plug is tted with an earth contact and that
there are no multiple sockets connected to it; the equipment
automatically starts.
Press the main switch (1), the equipment starts working
automatically.
NO
SWITCH OFF (OFF)
Press the main switch (1), otherwise manually
disconnect the power plug.
2
3