iScooter iK2 - User Manual

Need help?

Do you have a question about the iScooter iK2 and is the answer not in the manual?

Summary

Safety Instructions

Always Inspect the E-Scooter Before Riding

Properly inspecting and maintaining the e-scooter can reduce the risk of injury. Always inspect it before riding and regularly maintain it.

Before Riding

Stem Lock Tightening Check

Ensure the stem lock is tightened before riding to prevent loss of control or falls. Contact support if unsure.

Start Riding

Safety Gear for Riding

Always wear helmets and knee pads for protection against falls and injuries when starting to ride.

Initiating Movement

Place your foot on the deck and kick off to start, then gently press the throttle when stable.

Turning Technique

Tilt your body's center of gravity and slowly turn the handlebar to change direction.

Riding Notice

Riding Conditions and Precautions

Ride cautiously in rain, on uneven roads, and avoid obstacles or downhill acceleration.

Safe Riding Practices

Avoid pressing the throttle when walking and refrain from hanging objects on the handlebar.

Daily Care and Maintenance

E-scooter Cleaning and Storage

Clean with a damp cloth, avoid pressure washers, and store indoors in a dry, cool place.

Battery Maintenance Guidelines

Use original charger, avoid extreme temperatures, charge fully before storage, and do not over-discharge.

This document is a user guide for the iScooter iK2 electric scooter for kids. It provides essential information regarding safety, assembly, usage, specifications, and maintenance.

Function Description:

The iScooter iK2 is an electric scooter designed for children, serving as a sport and entertainment tool. It is intended for single riders and is not suitable for carrying passengers. The scooter features a handlebar for steering, a throttle for acceleration, and a rear fender brake for stopping. It also includes a Bluetooth connectivity feature, allowing users to connect their phone to play music.

Important Technical Specifications:

Dimensions (Unfolded): 60.5 cm (L) x 28.2 cm (W) x 82.5 cm (H)
Dimensions (Folded): 60.5 cm (L) x 28.2 cm (W) x 16.8 cm (H)
Net Weight: 8.8 LBS (4 KG)
Gross Weight: 12.1 LBS (5.5 KG)
Maximum Load: 110 LBS (50 KG)
Applicable Age: 3+
Top Speed: 4.9 mph (8 km/h)
Range: 30-60 minutes
Battery Rated Voltage: 18V
Battery Rated Capacity: 2.0Ah
Motor Power: 70W
Charger Rated Input Voltage: AC100-240V
Charger Rated Output Voltage: 21V
Charger Rated Current: 0.5A
Charging Time: 4-5 hours

Usage Features:

The iScooter iK2 is designed for ease of use and safety for children.

Assembly: The scooter requires some assembly, including installing the front wheels and handlebar, and unfolding the stem. Detailed instructions are provided for these steps, emphasizing the importance of tightening all fasteners.
Handlebar Adjustment: The handlebar height is adjustable to suit the child's height, ensuring a comfortable and safe riding position. This is done by opening a stem clamp lever, pressing a stem pin, and raising or lowering the handlebar until it clicks into a pin hole.
Starting the Scooter: Riders should wear helmets and knee pads. To start, hold both ends of the handlebar, place one foot on the deck, and kick off with the other foot to gain momentum. Once moving, place the second foot on the deck and gently press the thumb throttle to accelerate.
Stopping the Scooter: To stop, release the throttle first, then step on the rear fender brake.
Turning: When turning, riders should tilt their body's center of gravity slightly toward the turning direction and slowly turn the handlebar.
Folding Mechanism: The scooter features a folding mechanism for compact storage and transport. The stem can be raised to a vertical position for riding or lowered towards the deck for folding by pulling the folding mechanism.
Bluetooth Connectivity: The scooter can connect to a phone via Bluetooth to play music, enhancing the riding experience.

Safety Instructions and Warnings:

The manual stresses the importance of parental supervision and adherence to safety guidelines:

Parental Responsibility: Parents are responsible for reviewing all warnings, cautions, instructions, and safety topics with their child and ensuring they understand them. Adult guidance is required at all times for children and preteens.
Pre-Ride Inspection: Always inspect the e-scooter before riding. Check and secure all fasteners, and replace worn or broken parts immediately.
Protective Gear: A helmet and other protective equipment (e.g., knee pads) are mandatory when riding.
Riding Environment:
- Practice in open spaces and avoid traffic lanes until skilled riding is mastered.
- Do not ride in unsafe or illegal places.
- Avoid riding in bad weather (rain, snow, strong wind) to prevent danger.
- Do not use the product in environments below -5°C.
- Ride slowly or get off the e-scooter on uneven or poor road conditions.
- Do not ride on terrain with oil or ice.
- Avoid direct passage over stairs higher than 3cm; avoid steps lower than 3cm as much as possible.
- Avoid riding at night for safety.
Riding Posture and Actions:
- Keep both feet on the scooter while riding.
- Do not perform dangerous actions or ride with one hand.
- Do not ride with hands off the handlebar.
- Do not perform dangerous stunts with one foot off the deck.
- Do not turn the handlebar sharply while riding.
- Do not accelerate when going downhill.
- Do not press the thumb throttle when walking the scooter.
Weight and Passengers:
- No passengers are allowed.
- Do not hang heavy objects (e.g., backpacks) on the handlebar.
Water Immersion: Do not immerse the product in water deeper than 3cm or directly spray water on the e-scooter body to avoid damage to the electrical system.

Maintenance Features:

Cleaning:
- For general cleaning, use a soft cloth damped with clean water.
- For stubborn stains, a toothbrush with toothpaste can be used, followed by wiping with a damp cloth.
- Scratched plastic parts can be polished with sandpaper or abrasive materials.
- Avoid using alcohol, gasoline, kerosene, or other corrosive/volatile chemical solvents.
- Do not use a pressure washer.
- Before cleaning, ensure the scooter is turned off, the charging cable is unplugged, and the charging port rubber cover is tightly closed to prevent electric shock or water damage.
Storage:
- Store the e-scooter indoors in a dry and cool place when not in use.
- Avoid prolonged outdoor storage, as sun exposure, overheating, and low temperatures can accelerate aging of appearance and tires, and reduce battery pack life.
Battery Maintenance:
- Use only the original charger.
- Do not use battery packs from other models or brands.
- Avoid touching battery contacts or disassembling/puncturing the casing to prevent short circuits, damage, or casualties.
- Dispose of used batteries according to local regulations; do not discard them arbitrarily.
- Fully charge the battery after each use to prolong its life.
- Avoid storing the battery pack in temperatures above 50°C or below -20°C.
- Do not expose the battery pack to fire.
- If the scooter is not used for more than 30 days, fully charge it, store it in a cool, dry place, and then fully charge it every 60 days. Failure to do so may damage the battery, which is not covered by the warranty.
- Avoid recharging when the battery is completely exhausted.
- The battery pack provides longer range and performance at room temperature (around 20°C). Performance decreases below 0°C.
- A fully charged scooter will exhaust its power in approximately 120-180 days of standby. The battery has a smart chip to record charging/discharging. If not charged in time, it may over-discharge and suffer permanent damage, which is not covered by the warranty. Non-professionals should not disassemble the battery pack.