EasyManuals Logo

Iseki SF438 User Manual

Iseki SF438
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
SF438,450
70
27. PERIODICAL INSPECTION TABLE
: Inspect, replenish or adjust
: Replace
: Clean or wash
: Replacement or servicing at authorized service facility recommended.
Before Operation
Initial 50 Hr
100 Hr
150 Hr
200 Hr
250 Hr
300 Hr
350 Hr
400 Hr
1 / Year
1 / 2 Years
Intervals Judgement criteria
Ref.
page
Engine oil

Replace after initial 50 Hr.
and then after every 200 Hr.
Maintain the specified level. 61
Air cleaner

Clean after every 50 Hr. 53
Radiator coolant

Replace once / 2 Years Maintain the specified level. 64
Fuel
Keep fuel tank always full. 53
Fuel filter

Clean after every 100Hr.
Replace element after every
300Hr or once / 1 year
There should be no dust or
water in filter.
54
Fan belt
Replace as required. 10.0 mm (0.4 in.) deflection 55
Electrolyte level

Replenish electrolyte as
required.
Level should be kept properly.
58
Battery condition

Charge or replace as required. 58
Engine oil filter

Replace after initial 50 Hr.
and then after every 400 Hr.
62
Transmission oil
(HST & PTO cases)

Replace after initial 50 Hr.
and then after every 300 Hr.
Maintain the specified level. 62
Suction filter

Clean after initial 50 Hr.
and then after every 300 Hr.
63
HST belt

Check after every 100Hr. -
Break pedal linkage
56
Steering wheel
Check after every 300Hr. There should be no abnormality. -
Tire pressure
Front : 24 x 12.00 - 12
Rear : 20 x 10.00 - 10
Front: 220 kPa (2.2 kgf/cm
2
)
Rear: 230 kPa (2.3 kgf/cm
2
)
60
Toe-in
Adjust after every 300Hr. 2 to 6 mm(0.08 to 0.23 inch) 60
Wheel tightening bolts
and nuts

Check after initial 50 Hr.
and then after every 300 Hr.
58
Grease-up

Inject grease after every 50Hr
-
Radiator screen
There should be no clogging.
64
Radiator
There should be no clogging.
64
Electrical apparatus
All should work properly. -
Safety switches
All should work properly. -
Air intake openings
All should work properly.
-
Bolts and nuts
There should be no loose ones.
-
Rubber pipes

Check after every 100Hr -
IMPORTANT: • Above mentioned service intervals are for normal usage. If working conditions are harder, earlier
service is recommended.
If special skill or special tool are required or you feel difficulty in maintenance, consult your dealer.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Iseki SF438 and is the answer not in the manual?

Iseki SF438 Specifications

General IconGeneral
BrandIseki
ModelSF438
CategoryLawn Mower
LanguageEnglish

Related product manuals