What causes the charge lamp to blink on my Iseki SXG216?
A blinking charge lamp can be caused by defective wiring, so correct loose, dirty, short, improperly earthed terminals. It could also be due to a lower electrolyte level, so replenish with distilled water to the upper limit. A loose fan belt can also cause this, so tighten it properly.
Why is the steering wheel very heavy to turn on my Iseki SXG216?
A heavy steering wheel can be due to low tire pressure, so correct it as specified. It could also be caused by a lack of grease on the steering gear or knuckle spindle, so grease them up. If there is dust trapped between the teeth of the steering gear, remove the dust and clean up the teeth.
Why does the Iseki Lawn Mower lift not rise?
The lift may not rise if the lock latch does not come off from the groove. Check that the push button comes off. Another cause may be malfunction of the mower lifting rod, so check for deformation of the rod.
Why does the Iseki SXG216 Lawn Mower lift not lower?
The lift may not lower if the lock latch does not come off from the groove, so check that the push button comes off. If the height adjust system is applied, set the height adjust dial to the lowest position. Another cause may be malfunction of mower lifting, so correct it to the proper length.
Why does the steering wheel have a tendency to turn in one direction on my Iseki SXG216?
A steering wheel that pulls to one side can be caused by uneven tire inflation, so inflate both front and rear tires to the specified pressure.
General| Engine Power | 13.5 hp |
|---|---|
| Engine Type | Diesel |
| Transmission | Hydrostatic |
| Engine Power (kW) | 10 kW |
| Cutting Width (alternative) | 40 inches |
| Fuel Capacity | 18 liters |
| Grass Collector Capacity | 320 L |
| Engine Power (alternative) | 13.5 hp |
| Fuel Tank Capacity | 18 liters |
Guidelines for safe operation and operator responsibilities.
Pre-operation checks and safety procedures before starting.
Safe operating practices and warnings during use.
Specific safety advice and limitations for operating on slopes.
Regulations and safety for road use.
Safe procedures for transporting the mower via truck.
Safety precautions and procedures for refueling.
Instructions for safely attaching and detaching the drive shaft.
General safety guidelines related to maintenance tasks.
Safety procedures for electrical system maintenance.
Safety checks and precautions for tyres and wheels.
Safety measures to take before storing the mower.
Safe procedures for long-term storage of the mower.
Location and meaning of all safety labels on the machine.
Operation and functions of the starter switch.
How to control engine speed using the throttle lever.
Explanation of warning and indicator lights on the panel.
Engagement and disengagement of the Power Take-Off lever.
Function of the hourmeter for tracking operation time.
Operation of the headlight switch.
Identification of components on the fender panel.
Operation and functions of the mower lift lever.
Indicates the current fuel level in the tank.
Description and function of the HST and brake pedals.
Description of additional controls like safety switches.
Explanation of safety interlock switches and their function.
How to adjust the mower deck cutting height.
Comprehensive list of items to check before daily operation.
Reference to the maintenance section for inspection procedures.
Steps and precautions before starting the engine.
Detailed procedure for starting the engine.
Safe procedures for shutting down the engine.
Instructions and safety for moving the machine.
Procedures for stopping the machine during operation.
How to check and maintain the engine oil level.
How to check and maintain transmission oil levels.
Checking and refilling the engine coolant.
Checking and refilling the fuel tank.
Inspection, cleaning, and replacement of the air cleaner.
Checking and cleaning the fuel strainer.
Checking fuel hoses for leaks and damage.
Inspecting and adjusting the fan belt tension.
Maintenance and adjustment of the Mid PTO belt.
Adjusting the machine's brake system.
Information regarding the HST neutral position adjustment.
Information on adjusting the machine's travel speed.
Checking and tightening wheel bolts.
Safety and maintenance procedures for the battery.
Checking and maintaining correct tyre pressure.
Inspecting the steering wheel for smooth operation.
Procedure for replacing engine oil.
Procedure for replacing the engine oil filter.
Procedure for replacing transmission oil.
Cleaning air intake openings to prevent overheating.
Cleaning the radiator and radiator screen.
Procedure for replacing engine coolant.
Checking fuses and wiring for electrical issues.
Maintenance of hydraulic system components.
Testing safety switches for proper function.
Diagram showing lubrication and fluid fill points.
Schedule for routine inspections and maintenance.
Safe procedures for washing the machine.
List of common replacement parts and consumables.
Procedures for short-term storage.
Procedures for long-term storage, including battery care.
Common engine problems and their solutions.
Troubleshooting issues with the master brake system.
Troubleshooting problems with the mower deck lift system.
Troubleshooting issues related to steering.
Troubleshooting problems with the hydrostatic transmission.
Troubleshooting issues with electrical components.
Procedures for installing and removing the mower deck.
Safe operation procedures for the mower deck.
Inspection and maintenance tasks for mower deck components.
Procedures for storing the mower deck.
Common problems and solutions for the mower deck.
Procedures for attaching and detaching the grass collector.
Safe operation procedures for the grass collector.
Inspection and maintenance for collector parts.
Procedures for storing the grass collector.
Common problems and solutions for the collector.
To Next Page
