12
-Please do not disassemble or modify.
If you disassemble incorrectly, it can breakdown the machine.
If you modify the machine, put on some parts that are not approved
or take out some parts, it can cause a serious accident.
(We cannot guarantee the quality of the machine after this.)
-As the seal Heater becomes very hot, please be
careful not to touch it directly with hands or clothes.
Also, please raise the heater guard when the machine is not in
operation.
Even after switching off the machine the seal heater remains quite
hot. You may get burned when you touch it.
- Please be careful with the lm cutter.
When you change the film, please be careful not to touch the film
cutter. You may cut your hands on the cutter blade.
-Please do not put your hand inside the infeed unit
or wrapper unit.
If you have to put your hand inside to take out something on the infeed
unit or wrapper unit, please do not forget to press EMERGENCY
SWITCH.
Also, please do NOT put your hand inside the machine when
wrapping operation is being done. It can catch your hand.
Precautions of handling
Heater guard
To Next Page
Loading...