EasyManuals Logo

iSimple ISFM21 User Manual

iSimple ISFM21
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4. Frequency Selection and
App Operation
Selecting the ISFM21 Frequency
The factory-set operating frequency
is
88.3
FM.
If
an
alternate frequency is desired, the
frequency may
be
easily adjusted using the selector switch on the side
of
the module (see
illustration
).
For full frequency tuning control, visit the Android Market to download the free
app for Tranzlt BLU.
Side
of
ISFM21
app
controlled 1106
.318
8.3 187.9
5.
Bluetooth Pairing and Connecting
To
pair your Android device with the ISFM21 (this is only required the first time you use
the Tranzlt BLU, after being paired, it will automatically reconnect with the android device
when returning to the vehicle)
A.
Turn the vehicle on.
B.
Open your device's Bluetooth settings menu, and search for new
Bluetooth adaptors.
C.
Select the device called "TranzltBLU
".
Choose "Connect"
Note: If pairing is not successful within the first 2 minutes after turning the vehicle on, cycle
ignition off, then begin again
at
step A
6. Troubleshooting
Symptom
Cause Remedy
No Audio from the Android
1) The radio
is
not set to the Tune to the default frequency: 88.3FM
source correct station
2) Device is not paired Please reference section 5
for device pairing.
Noise
I static on
regular
FM
ISFM21 is active.
Pause the andorid device, and wait 8
stat
i
ons
seconds.
Access the ISFM21 App, and select the
OFF option.
Audio
is
distorted
The input from the android
turn down the volume on the android
source is too loud.
source until distortion is
no
longer
heard.
Can not find Tranzlt BLU
The Tranzlt BLU is no longer in Turn the vehicle off, then back on again,
when searching bluetooth pairing mode (lasts 2 minutes
try to pair within the first 2 minutes of
devices after key on)
key on.
Message
appears
on
The device did not properly
Press "Connect" aagin.
If
pairing
adnroid
device
If
a
establish a bluetooth connection continues to fail. cycignition off, back on
message
appears
on
your
and try pairing again.
device sating "Pairing
The ISFM21 gain is set too low Adjust the gain setting on the back side
unsuccessful"
Make
sure
of
the ISFM21
"Tra
nzlt
BLU
"
is
turned
on, in
range
,
and
is
ready
to pair.
3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the iSimple ISFM21 and is the answer not in the manual?

iSimple ISFM21 Specifications

General IconGeneral
BrandiSimple
ModelISFM21
CategoryCar Receiver
LanguageEnglish

Related product manuals