eJoni
Cleaning & maintenance
Keeping your bike clean and maintained comes with many benets. Not
only will your Islabike perform better but it will be safer, last longer and look
great. To do this we have listed some regular checks to help you along the
way. Of course, if you are unsure of anything we strongly recommend you
seek professional advice or contact our technical support team on
+44 (0) 1584 708 383 or email techsupport@islabikes.co.uk.
Avoid turning your bike upside down and resting on the handlebar/
saddle as this may crush the iWoc Trio controller and cause
irreversible damage to the unit.
Your eJoni bicycle contains electrical parts that could be sensitive to
damage if cleaned incorrectly. Only clean your bicycle by hand using
a wet cloth and do not attempt to shower or submerge the unit.
DO NOT use a pressure washer to clean your bike; particularly on
the surface of the motor, remote control, downtube cable port or
charging port. Use of a pressure washer may damage the seals
protecting electrical equipment inside of your eJoni bike beyond
repair and will void the terms of your warranty.
Moving parts on your bicycle will need lubricating from time to time.
Weather conditions are generally the biggest factor that determine
frequency of maintenance and lubrication. However, it is also heavily
dependent on the frequency, type and duration of riding.
Component Lubricant Frequency
Chain Oil Weekly or after washing / rain
Headset Grease 6 months
Pedals n/a Sealed bearings
Brake uid Tektro Brake uid - Mineral Oil 12 months - Service
Bottom bracket n/a Sealed bearings
To Next Page
Loading...
