iSMA iSMA-B-4I4O-H-IP - User Manual

MINI and MIX Series
I/O modules
User Manual
Modbus
Global Control 5 Sp. z o.o.
Warsaw, Poland
www.gc5.pl
Poland, Warsaw
www.gc5.pl

Summary

1 Introduction

1.1 Safety and Specifications

Essential safety rules and comprehensive technical specifications for module operation.

1.2 Connection and Communication Setup

Guidelines for power supply, RS485 connection, address, baud rate, and protocol configuration.

1.4 Default Settings Restoration

Procedure for resetting the module to its factory default configuration.

2 Configuration Registers

2.1 Module Identification and Basic Settings

2.2 Communication Parameter Registers

Registers for setting data bits, stop bits, parity, response delay, and watchdog time.

3 Local I;O

3.1 Universal Inputs: Connections and Registers

3.2 Digital Inputs: Connections and Registers

3.3 Output Types: Analog, Digital, and Triac

3.4 Special Application Modes

Configuration and operation of special application modes for specific modules.

4 WEB Configuration (IP Version)

4.1 Web Access and Device Information

4.2 Local I;O Configuration via Web

Configuring Universal, Digital Inputs, and Outputs through the web interface.

4.3 Network Configuration

5 Modbus TCP;IP Modules

5.1 Modbus TCP;IP Operation

5.2 Modbus TCP;IP to RS485 Gateway

iSMA iSMA-B-4I4O-H-IP Specifications

General

Brand	iSMA
Model	iSMA-B-4I4O-H-IP
Category	I/O Systems
Language	English